1990 kawasaki ZZR 1100 - Page 8 - Answered Questions & Fixed issues


you can order one form any kawasaki dealer

kawasaki... | Answered on May 27, 2019 | 159 views


If the fuel isn't all over the floor, I'd be checking that your riding buddies aren't playing a prank. Otherwise, debris in inlet valve or bad valve or float.

kawasaki... | Answered on May 16, 2019 | 30 views


online search for area parts /distributor

kawasaki... | Answered on May 09, 2019 | 46 views


Hi, Perfecto for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://itstillruns.com/instructions-oil-change-kawasaki-motorcycle-6234941.html
kawasaki barako gtoil treated
Kawasaki barako 175 manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

kawasaki... | Answered on May 08, 2019 | 25 views


That vintage of motorcycle I would be checking the plug wires and plug caps for breakdown. Find the darkest place at night, rev your engine and look for arcing from your wires to the engine. It's also time to check for any deterioration of rubber hoses and components. Beautiful bike you have there!!

kawasaki... | Answered on Jun 03, 2019 | 35 views


Hi, Jtom for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.youtube.com/watch?v=rXeBF4dorH8
Changing Your Motorcycles Clutch
Kawasaki barako 175 manual
https://www.partsfish.com/page/oem-parts-for-kawasaki
http://mybikemanuals.com/kawasaki

kawasaki... | Answered on Apr 30, 2019 | 58 views


Oh, nice bike. I had a 1971 model in the UK, reg was WTO 127J, it is still around according to DLA.

If it has three sets of points, as opposed to CDI, all the points must be clean and gapped. I used to carry 6 clean spark plugs in my pocket and on the bike. Leads and plug caps need to be in good condition.

kawasaki... | Answered on Apr 28, 2019 | 27 views


Hi, Alex if your headlight is not working, intermittent, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your headlight bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to the headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.sportbikes.net/forums/zzr-600/387131-need-help-fast-headlights-not-working.html
Headlight doesn work KawiForums Kawasaki Motorcycle Forums
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja ZX 6R Owner Manual

kawasaki... | Answered on Apr 16, 2019 | 42 views


If you search on Google for workshop manuals Kawasaki 1033 1981 There are lots of them on there

kawasaki... | Answered on Mar 29, 2019 | 29 views


Try unplugging the Handle Bar Kill Switch.....Sounds like the CDI is grounded.....Make sure the Pick Up wire from the Engine case is plugged into the wiring harness...This is what triggers the CDI to fire the Spark Plug........

kawasaki... | Answered on Mar 26, 2019 | 28 views


Sounds like a neutral switch relay problem....check your relays and fuses..........

kawasaki... | Answered on Mar 28, 2019 | 54 views


What do you mean by overloaded? Do you mead too high of RPM's? Floating the valves can result in the valves hitting a piston and bending one of them or worse.

kawasaki... | Answered on Mar 20, 2019 | 36 views


Bikes of that age only need a few things to run.

Compression
Fuel
A spark at the right time

One of those three is defective?

Compression, check with a compression tester
Fuel, is it clean and fresh. Is it getting to the spark plug, it is wet with gasoline?
A spark at the right time. New spark plug and engine correctly timed. A nice fat blue spark if you put the plug against the cylinder head?

kawasaki... | Answered on Mar 18, 2019 | 60 views


Exhaust Butterfly Valve - RiderForums.com


https://www.riderforums.com/z1k-z750.../58255-ehaust-butterfly-valve.html

May 25, 2010 - I am getting an error code of 63 which tells me it's the. ... 2007 Kawasaki Z1000 w/ Full Race 4-2-1 Akra, PCIII, K&N, Airbox Mod, Engine Ice, ...

Exhaust install = Service code 63???? - KawiForums - Kawasaki ...


https://www.kawiforums.com/2007.../102064-exhaust-install-service-code-63-a.html

Feb 10, 2008 - 8 posts - ‎4 authors
Join Date: Dec 2007. Location: san ... Has anyone had this code show up? If so, was it ... code 63 is the exhaust butterfly servo. Penna zx6r is ...

FI codes - Kawasaki Z1000 Forum: Kawasaki Z1000 Motorcycle Forums


https://www.z1000forum.com/forum/z1000-service.../141042-fi-codes.html

Apr 8, 2014 - 5 posts - ‎3 authors
Hi is it possible to view FI codes on a 2013 z1k gen 3? If yes what's the ... No i have code 39 ecu communication error. My fan comes on as ... FI Code Quick Chart and Z1000 owner Manual (3rd gen ...
1 post
May 14, 2016
FI Light
10 posts
May 11, 2015
F1 light - Page 3
8 posts
May 6, 2013
More results from www.z1000forum.com

And from our M/C Guru Gregg Mahin

for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Ehaust Butterfly Valve
Kawasaki Fault Codes
Kawasaki Z1000 Service Manual
OEM Parts for Kawasaki
Download Manual 2007 Kawasaki Z1000 Owner Manual

kawasaki... | Answered on Mar 11, 2019 | 196 views


Try looking at the main fuse (30amp) on the starter solenoid. Make sure handlebar run switch is to on position - we all do it! and also check battery connections are tight - especially the negative lead.

kawasaki... | Answered on Mar 05, 2019 | 41 views


From a dealer or Canadian Tire, or a parts place , maybe Walmart.

kawasaki... | Answered on Feb 19, 2019 | 30 views

Not finding what you are looking for?
1990 kawasaki ZZR 1100 Logo

56 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6422 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...