20 Most Recent 2008 Honda CBR 1000 RR Fireblade Questions & Answers

Superspor231 the reason your bike failed to start is stored in your original ECM

2008 Honda CBR... | Answered on Apr 27, 2017

I've used Vp racing fuels 100 octane in my 88 CBR 600 f1 Hurricane.. only because i ran out of gas at the track when i was racing, but at $8 dollars a gallon, I'll bring my own next time..! and i didn't notice a thing, but i do notice a major difference when i use 87 as opposed to 91 which my bikes frame info says use only 91 or higher octane only! i could have also used 110 octane right next to it but it cost even more...look racing fuel at tracks are mainly for low compression race engine that will have turbocharged engines in them eg 9:1 ratio 110 octane 10:1 100 octane 11:1 95 octane 12:1 91 octane. higher octanes in a higher compression ratio will sometimes make it difficult to start so dont go real high!

2008 Honda CBR... | Answered on May 24, 2015

yes the servo has to b in the original position before the cable removal

2008 Honda CBR... | Answered on Dec 09, 2013

I would be checking your tail light earth, or any wires in that area.

2008 Honda CBR... | Answered on Oct 28, 2013

If your battery is completely flat you will not be able to push start it as you will get no spark.

I think you need a manual and you can download it here free:

Please leave fair comment if I have helped you.

thanks for that

2008 Honda CBR... | Answered on Apr 13, 2013

Sounds like a code 34. What I see is exhaust control valve loose/poor connection/circuit malfunction. You can go to the following link and follow a thread that includes discussion of that code. http://www.1000rr.net/forums/showthread.php?t=81141

Also, you can download the entire manual (warning it's huge) with codes and all here:

2008 Honda CBR... | Answered on May 05, 2012

Just remove plastic located directly under seat with hand or thin object, under that is a Philip screw...take screw out and slap yourself in the face and say that was it!!!

2008 Honda CBR... | Answered on Jul 20, 2011

hi below the seat, you will see a plastic infill this is a small cover, carefully remove this and you will find a bolt in each side of the seat, remove this bolt and lift up on the seat from the front, replace in reverse

2008 Honda CBR... | Answered on May 19, 2011

Maybe try a little blue locktite on the seat screws. The removeable thread locker type, not the red permanent locking type. I just got a 2008 today so will see if I have this problem in the srping time.

2008 Honda CBR... | Answered on Dec 26, 2010

Not finding what you are looking for?
2008 Honda CBR 1000 RR Fireblade Logo

63 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6495 Answers


Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

CBR 1000 RR Fireblade Honda

  • CBR 1000 RR Fireblade Honda

Most Popular Question

remove seat 2009 honda cbr 1000

  • Motorcycles