20 Most Recent 2003 Honda CBR 600 RR Questions & Answers

First, DO NOT crank this bike for now!
Troubleshooting time!

1. The other culprit could be/is the drive line - chain/front sprocket/rear sprocket. Carefully examine the area around the front sprocket where the chain rides to see if there is contact to any of the engine cases/swingarm area. IF this area is the cause you will see obvious signs of the chain rubbing something.. or the chain is excessively worn and loose and dry.
Look carefully around the drive line .... if you see nothing wrong.. then its internal

2. Drain the oil in a clean drain pan...one that can easily hold all the oil... you are going to run a magnet around in the used oil to see if there are any magnetic particles (a minute quantity of microscopic ones are normal).. you are looking for a quantity of larger chips or particles..(indication of internal damage). If a magnet does not show any unusual particles, then CAREFULLY pour the oil - SLOWLY! - through a FINE FILTER..(***** hose works well)..you need to see if there is aluminum ground up in the oil..(your engine will grind up aluminum!!) it will pack into crevices and corners...it will be very fine if it comes out with the oil. After this remove your oil filter... carefully cut it open and look for metal contamination(see above).
IF you find ANYTHING in these test, you need to find out why! This will involve a professional mechanic and some disassembly of the engine. The problem will be obvious when you get to what is causing the problem! (Either ferrous or non-ferrous should help the mechanic with the diagnosis).

2003 Honda CBR... | Answered on Jun 05, 2017

the voltage of a normal battery
if it was running when checked it should have been 14.5-14.8 volts dc
have the battery checked using a load test meter

2003 Honda CBR... | Answered on Apr 05, 2017

check ignition fuse.

2003 Honda CBR... | Answered on Oct 16, 2013

In cleaning your bike you have caused some sort of problem. Start with checking the battery terminals to make sure they are connecting properly. That is what your problem sounds like. Then check to make sure you have not dislodged any electrical wires, and lastly, get your battery checked to make sure that it has not dis-charged during your cleaning operation. This would be easier with a manual if you have one.

2003 Honda CBR... | Answered on Jul 03, 2013

does it have a backup manual "kick start" near the foot peg. if so try it, and if it starts it could be the starter or the electric ignition switch itself. any honda dealer should have access to any parts you might need, as well as a repair manual for the bike.

2003 Honda CBR... | Answered on Jan 06, 2013

Not finding what you are looking for?
2003 Honda CBR 600 RR Logo

Popular Tags

55 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers


Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

CBR 600 RR Honda

  • CBR 600 RR Honda

Most Popular Question

bike wont start hear click but nothing

  • Motorcycles