20 Most Recent
1988 Honda CBR 750 Hurricane - Page 2 Questions & Answers
How do i remove the seat on a honda bushlander ctx 200 ag bike
I think on the CTX models it is a fixed seat so you will have to find all the bolts and screws that hold it onto the bike frame. It isn't designed as a 'lift off' access seat. Most of the access to fuse panel, battery (Right side) and air filter (Left side) is through the side covers on the bike. These covers are held in place with a single bolt/screw and swing out and down to remove them.
11/17/2022 11:53:37 AM •
Honda...
•
Answered
on Nov 17, 2022
Honda Hornet electrical fault
Hi,
you are smart to have checked the fuses. I would just start by replacing each bad light's bulb and determine if the light functions again. If this doesn't work, then you'd need a more detailed look at the wire that connect to each bulb. If the horn shares any wires with the lights, that would probably be a good wire to start testing before moving on.
Thank you.
10/29/2022 2:01:15 AM •
Honda...
•
Answered
on Oct 29, 2022
1998 CBR1100XX Blackbird airscrew settings?
I was taught to screw in the adjustment until it runs rough, then back off until it smooths out then 1/4 more, with multiple carbs a synchronizer is required, fuel injection has none I know of.
10/23/2022 10:23:59 PM •
Honda...
•
Answered
on Oct 23, 2022
Possible causes for a runaway starter motor?
Hi,
The only thing that comes to mind for me is that there is a compatibility mismatch between your alternator and the rest of the car. If the alternator is "overcharging", then that means that is restoring your battery with too much power and the battery compensates by giving off power even when it's not supposed to. Thank you.
10/10/2022 6:28:06 PM •
Honda...
•
Answered
on Oct 10, 2022
I have a 2006 Honda CBR1000RR
There are three main reasons why a motorcycle clicks when you try to start it. The first and most common reason is because of a dead battery. The second reason could be due to a bad starter. The third most common but less likely reason the motorcycle is clicking could be due to a seized engine.
10/9/2022 9:37:01 PM •
Honda...
•
Answered
on Oct 09, 2022
85 Honda 250R Bore Size Question?
Bore / stroke
66 x 72mm
72 mm stroke, so the difference in bore diameter is 1.5 mm. 72 x 1.5 = 108 cubic Millimetres. Divide by 10 to make it cubic centimetres and the answer is 10.8. Your new engine will be 256.8 cc.
10/8/2022 11:16:58 PM •
Honda...
•
Answered
on Oct 08, 2022
Not finding what you are looking for?
