20 Most Recent
1987 Honda VT 500 C - Page 7 Questions & Answers
1 Answer
Hello po, bago po ako dito, honda tmx 155 po motor ko, ang problema ko po is pag umaahon ako kahit mag isa lang ako kailangan ko po mag bawas lagi ng kambyo, kahit mahaba yung bwelo, 14/51 po ang sprockets ko, bago din lining, kapag umaahon sya lumalagitik sya tapos lalata nalang bigla, salamat po sa makakasagot..
Hello, I'm new here, honda tmx 155 my motor, my problem is that when I'm up I need one I need to keep the kick out of it, even if it's too long, my sprockets are 14/51, before the lining, when he comes up he's staring at it then suddenly, thank you for the answer ..
Honda...
|
Answered
on Jun 02, 2019
1 Answer
My Honda 450 Foreman is leaking fuel from the hose coming from the bottom of the carburetor bowl. Is this hose supposed to be connected to something? Or is the 1 way valve in the hose the problem?
This problem can occur on any bike that is carburetted and uses a needle and seat/float bowl system. Basically any bike that isn't fuel injected in other words. The reason fuel is being dumped is because it isn't getting shut off and is flowing past the needle/seat. The cause of this is one or more of the following. Dirt or foreign material interfering with needle/seat/float operation.....Worn needle and/or seat....Malfunctioning float due to leaking float...Is there any thing in the float when you shake it?......Lastly, and I cannot stress this point enough,.....Improper float level setting. This is a critical setting and must be set as accurately as possible according to manufacturer's specs. It is accomplished by bending the tang of the float which will control how much fuel will be in the float bowl when the float bowl is full. Think of a common toilet with a float mechanism because it is the same principle.
Honda...
|
Answered
on May 23, 2019
Not finding what you are looking for?
