20 Most Recent
Questions & Answers
The engine oil lamp won't go off after ignition
Oil light stays on until oil pressure rises enough. Engine temp light should come on when key is turned on and then go off after 3-5 seconds. Wait till temp light goes off and then press starter button but DO NOT open throttle. Bike should start if there are no other problems and oil light should go off after engine starts. If you open throttle, engine may not start.
2004 BMW F 650...
on Mar 15, 2017
Pleas tell me why no spark
Did you pull a plug and see it not sparking? What condition are the plugs in? How about spark plug wires, are you sure they are not arcing? If not that a resistance test on the coil/s can confirm if they are functioning properly or not. Of course, this is all assuming you don't have the ingnition kill switch engaged :)
BMW F 650 CS...
on Oct 14, 2014
Driving lights wiring diagram 2006 BMW R1200GS
Easiest way would be to install a switch between the lights and the high beam switch. That way it would still come on only when high beams are on but you could turn them off. Alternately you could rewire them completely so they run only off of a switch, but then you would have to tun them on and off manually all the time. ---> expect to be pulled over for not dimming your lights when you encounter an oncoming police car and you forget they are on.
on Feb 10, 2020
Not finding what you are looking for?