hI,
or a quick check of the correct orientation of the beam front, place the vehicle to ten meters away from a wall, making sure that the ground is level. The light spot, sit on the vehicle and verify that the beam projected on the wall is slightly below the horizontal line of the projector (about 9 / 10 of total).
To adjust the beam: Open the glove compartment (1) and disengage the side rods limit by pressing down moderately.
Using a screwdriver on the adjustment screws (2) lower on both headlamps
TIGHTEN (clockwise), the beam downwards.
TURNING (CCW), the beam upwards.
Good luck,
Alex
PS-Don't forget to vote me, thanks!