20 Most Recent
2001 Kymco Stryker 125 Questions & Answers
Engine not sparking from plug changed battery
Check the kill switches including the side stand switch, with an Ohmmeter. Check the fuses. Check the wiring harness. Are all wires clean and with a solid connection? Any abraded wires? Check the operation of the ignition switch with a volt ohmmeter. Is the bike in neutral and the neutral light is lit up?
If still no spark, get CDI system and coils checked at the dealers shop.
Please rate this answer. Thanks!
Deristrict kymco Stryker 125
there are different methods of restricting, hear we 1. gasket between the carb and inlet. ". gasket between the exhaust and head, 3. washer in the output sprocket to drive to wheal in the centrifugal clutch Re: Jeff
Engine starts when put in
check the switch on the stand may not be opening. normally if you leave the stand down it will cut the engine when you put it in gear, its a safety switch.
Looking for a carb for a kymco striker but i cant
http://www.epfguzzi.com/kymcobiz/service/index.html had a manual on your bike. Also gives part numbers and places to order part. Manual will give you a clue to the type Carb that was on there so you can find one to fit.
How to get to a crankshaft on a 2000 moped 2T 50
Take the engine out and completely disassemble the engine and cases as the cases need to be split to get crankshaft out... You will want someone to help you that has more experience, as it sounds like you don't have a lot.. Not saying it's a bad thing but when it is this serious help is good...
Timing headcam
get a manual for it and then you will be able to do any thing you have to do , when the time comes.
Where can i get mannual
hi m8 dont know about the manual but if u go to ebay.com and tape in kymco stryker they have loads of engine parts hope this helps m8.. will g..
Not finding what you are looking for?