2005 Husqvarna WR 125 - Answered Questions & Fixed issues
2005 WR 125 I need the manual
None of the manuals actually fit your description, but one of them could be a good guide for you:
http://www.carlsalter.com/motorcycle-manuals.asp
Power valve 1998 Husqvarna WR 125
Husqvarna is a nice option, my cousin owns one and so far so good. I am going to take a look at the Motor Husqvarna 2022 and see if I can pick up one for my daily life.
https://www.autofun.co.id/motor/husqvarna
2006 Husqvarna TE-610 only has intermittent spark one.
If you have already replaced the flywheel, stator, and CDI, the next step would be to check the ignition coil and spark plug. It is possible that the ignition coil is faulty and needs to be replaced. Check the spark plug for any damage or wear and replace it if necessary. Additionally, make sure all the wiring connections are secure and free of corrosion.
If none of these steps fix the issue, it may be best to take the bike to a mechanic or dealer for further diagnosis. They may be able to identify any other potential problems that could be causing the intermittent spark issue.
3/5/2023 9:12:58 AM •
Husqvarna...
•
Answered
on Mar 05, 2023
•
864 views
K970 won't start after rebuild
My first thought is that is the primer bulb in the right way round as effectively, it is a one way valve New bulbs also fail to work properly. I reckon that is why they come in packs of 10 :>D Take it off, connect it to fuel and make sure it pumps.
Also please note that we are not Husqvarna, we just have the category for easy filing.
11/29/2021 11:01:56 PM •
Husqvarna...
•
Answered
on Nov 29, 2021
•
224 views
Husky wr 250 wiring diagrams 1995 model
Most likely it will be the stater. And they are pricey. Coils hardly ever go bad or the only other thing that would cause a no spark problem could be the kill button. I hate to say it, but i think it will be the stater.
4/2/2019 12:32:00 PM •
Husqvarna...
•
Answered
on Apr 02, 2019
•
226 views
Husqvarna Z turn changed the rectifier and the battery and something is still killing the battery
Ok.. The rectifier only changes AC voltage to DC voltage.. the voltage to charge the battery comes from the generator.
With the engine running at half throttle+, and IN NEUTRAL, check the voltage at the battery terminals it should be 13 volts +. If you are not getting at least that much.. make sure all connections are tight.. if its less than 13V..... more checking is indicated. (Shop time)..sorry...
6/13/2017 11:52:58 PM •
Husqvarna...
•
Answered
on Jun 13, 2017
•
101 views
Not finding what you are looking for?