20 Most Recent 2005 Husaberg Fe 650 e Questions & Answers


Hi, Anonymous and the usual suspects are:
1. Low coolant level.
2. Restricted radiator air flow.
3. Faulty thermostat.
4. Coolant pump or fans inoperative.
5. Vent hose crimped.
6. The air in the coolant and needs bleeding.
7. Engine idling too long or bike moving too slow.
8. Coolant too old needs to be replaced.
9. Faulty temperature sensor, wiring or connector.
10. Radiator veins clogged or corroded needs repair
11. Cooling system leak.
12. Ignition timing retarded.
13. Spark plug heat range too high.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://husaberg.org/cooling-systems/1225-04-fe650e-overheating.html
Never Overheat Again The Cure
https://www.tradebit.com/filedetail.php/277018537-husaberg-fe450-fe501-fe550-fe650e-2004-2005 $15
http://www.cyclebuy.com/husaberg/parts.htm
https://www.husabergshop.se/documents/00670_%C4gar_Handbok.pdf

2005 Husaberg Fe... | Answered on Jun 13, 2019


i always just put some on the o-ring before i put it back in but no you dont need to have oil on it,

2005 Husaberg Fe... | Answered on Nov 10, 2008


Hi, Anonymous and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
13. Faulty auto choke or wiring connection.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://husaberg.org/fuel/5956-only-runs-choke-any-hints.html
WHY your motorcycle only runs on CHOKE
https://www.repair-manuals.eu/cat/motorcycle_repair_workshop_manuals/repair_manuals_husaberg
http://www.cyclebuy.com/husaberg/parts.htm
https://www.manualslib.com/manual/813892/Husaberg-E-400-E.html#product-FC%20550/4

Husaberg... | Answered on Jun 13, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Replace+the+battery+2002+husaberg+470-fxe&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjHooyGkObiAhXqqFkKHcIWB3kQ_AUIESgC&biw=1440&bih=757
http://husaberg.org/electrical/9274-new-owner-fx-470-2002-battery-replacement-question.html
http://husaberg.org/mechanical/11215-workshop-manual.html
http://www.cyclebuy.com/husaberg/parts.htm
https://www.manualslib.com/manual/640214/Husaberg-05.html

Husaberg... | Answered on Jun 13, 2019


The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the air filter box lid. (A spare fuse is located in the starter relay)

The fuse box containing the fuses of individual power consumers is located under the seat

Husaberg... | Answered on Feb 26, 2017


Hi, Pete and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your question please visit the website below. Good luck and have a nice day.
HUSABERG Pure Enduro Service

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Husaberg... | Answered on Nov 11, 2015


Its a long shot, but try Youtube.
They have tons of DIY videos.

Husaberg... | Answered on Jan 08, 2015


Basically the only way water can get in the oil is if there is a corrosion hole in the housing behind the pump impellor. Water pumps have only 1 seal and if that leaks water will drain from a hole in the pump housing under neath the pump.

Husaberg... | Answered on Mar 11, 2013


Hi, Christopher for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://goldwingdocs.com/forum/viewtopic.php?t=14251
https://www.youtube.com/watch?v=_fKe5QglIQY
https://www.manualslib.com/manual/1069155/Honda-Goldwing-Gl1100.html
https://www.partsfish.com/page/oem-parts-for-honda
https://www.manualslib.com/manual/1022151/Honda-Gold-Wing-Gl1100.html

Motorcycles | Answered Yesterday


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk02b65sTZKw2_cshcMeEiSzfxxf5Cw:1594395296228&source=univ&tbm=isch&q=honda+wave+100+wiring+diagram&sa=X&ved=2ahUKEwi3zIyqgcPqAhUmmuAKHZM3DSMQsAR6BAgKEAE&biw=1440&bih=757
https://www.pinterest.com/pin/825636544167746825/
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
https://www.partsfish.com/page/oem-parts-for-honda
https://absolutelyscooters.net/pdf/CGEN_dawg_scooter_manual.pdf

Motorcycles | Answered Yesterday


Hi, JB before diagnosing your blown fuse issue, check the bottom of your seat, if its metal and comes in close proximity to the positive battery post you need to take the necessary steps to ensure there is no contact (electrical tape, thick rubber insulation, hammer a dent in the seat bottom, etc.) You are going to need a wiring diagram from your service manual, a test light, an ohmmeter and plenty of extra fuses.
If you turn on your ignition switch and immediately blow a fuse you have a hard/dead short and is usually easy to find. With a test light connected to the hot side of the blown fuse holder start stabbing the wire/s that leads away from the fuse holder and towards the ignition switch, you test light will illuminate validating the short. When the test light fails to illuminate you have passed the short and need to back up until the test light illuminates, then look in the immediate area for the short.
If you driving down the road for 30 minutes or 15 miles and blow a fuse you have soft/flying short and may take some time and patience to find.
If the main fuse/circuit breaker constantly blows/trips while riding you probably have a faulty battery terminal connection. Check battery terminals for damage or corrosion, check battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary. Any other fuses that constantly keep blowing while riding are usually caused by a loose or corroded ground wire in the circuit, which means you have to check, inspect, test each and everyone with an ohmmeter set on a low ohm scale 100 ohms or less . Simply touch one lead to the ground source and the other lead to the battery negative terminal, a reading of zero indicates a clean solid ground. Any reading or infinity indicates a poor ground and needs to be repaired. Poor or weak grounds require excessive additional amperage to complete the circuit which in turn blows the small amperage fuse.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://kzrider.com/forum/4-electrical/538225-main-fuse-getting-real-hot-and-blowing
https://www.youtube.com/watch?v=kw11Onl7OLQ
https://bitbin.it/4OxDef39/
https://www.partsfish.com/page/oem-parts-for-kawasaki
https://www.zigwheels.ph/new-motorcycles/kawasaki/barako-ii/specifications

Motorcycles | Answered Yesterday


Hi, Haydn, I would love to help you with your motorcycle question but due to the magnitude of yesterday's solar flare the batteries in my crystal ball are dead and my telepathy headset circuitry was melted. I need the year, make, and model of your motorcycle please click on " Ask For More Information" directly below and provide this information in the box that will open and then click on the green "SEND" box in the bottom right-hand corner. Good luck and have a wonderful day.

Motorcycles | Answered Yesterday


Hi, Anonymous you need to repost your question under the Bandit Stump Grinder category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered Yesterday


Hi, Anonymous the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain specs-fluid requirements and capacities and wiring diagrams in the back pages. Another "FREE" source is online libraries you can join for a one month "FREE" trial then cancel at the end of the month. The rest usually charge a modest fee from $15-$20 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download view and print.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk00FQSOFf7aYJuJQRhoY2L8cNGh6-w:1594394054266&source=univ&tbm=isch&q=Rear+swingarm+assembly+parts+diagram+Yamaha+pw80&sa=X&ved=2ahUKEwjGyvHZ_MLqAhVhkuAKHfNzBk8QsAR6BAgJEAE&biw=1440&bih=757
https://www.bikebandit.com/oem-parts/1983-yamaha-pw80-pw80k-swingarm-rear-shocks/o/m147070sch212569
https://www.manualslib.com/manual/581554/Yamaha-Pw80-P.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/581541/Yamaha-Pw80-X.html

Motorcycles | Answered Yesterday


Hi, Anonymous derestrict is a negative term rider's use to express their wish to improve performance on their bike or scooter. Depending on the country and motor vehicles laws some bikes and scooters are designed to conform with said laws and their performance is slightly lower than other countries. All vehicles in the world are designed to perform at 75-80% of their maximum potential, this ensures the longevity of the engine. Derestricting or improving performance is always possible on any vehicle but the tradeoff of engine longevity numbers go down, how much depends on the number and type of performance upgrades. Your local dealership or reputable independent shop are best equipped to provide you with technical data and willingness to comply with your needs.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://korider.com/index.php?topic=5102.0
https://www.bikechatforums.com/viewtopic.php?t=127108
https://www.manualslib.com/manual/406853/Hyosung-Comet-125.html
https://www.hyosungwholesale.com/collections/gt125r
https://www.manualslib.com/manual/803358/Hyosung-Comet-250-R.html#product-COMET%20125%20-%20SERVICE

Motorcycles | Answered Yesterday


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery damaged or nearly discharged, should have 12.5 volts.
4. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or the fuel line is closed off, restricting fuel flow.
10. Choke valve inoperative.
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.kawasakiforums.com/forum/general-tech-9/very-confused-wont-start-ke100-11056/
https://thumpertalk.com/forums/topic/1287286-kawasaki-ke-100-wont-start/
https://www.tradebit.com/filedetail.php/281558262-kawasaki-ke100-motorcycle-complete-workshop-service-repair $20
https://www.partsfish.com/page/oem-parts-for-kawasaki
https://ownersmanuals2.com/kawasaki/ke100-1988-owners-manual-53102

Motorcycles | Answered Yesterday


Hi, Anonymous and the usual suspects are:
1. Choke not functioning properly.
2. The battery is not fully charged 12.5 volts or better.
3. Throttle not fully closed.
4. The intake manifold is loose or cracked and sucking air.
5. The air cleaner not sealed properly or missing element.
6. Air fuel mixture not adjusted properly.
7. Valves adjusted too tight.
8. Low compression top end needs a rebuild.
9. Engine oil to heavy for cold temperatures.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.scooterfocus.com/scooter_troubleshooting.html
https://www.youtube.com/watch?v=t0q2K13jSrg
https://www.motorcycle-manual.com/jonway/
https://www.scooterdomain.com/chinese-parts/by-brand/jonway/jonway-250cc-scooter-parts
https://www.onlymanuals.com/jonway

Motorcycles | Answered Yesterday


Hi, Anonymous the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain specs-fluid requirements and capacities and wiring diagrams in the back pages. Another "FREE" source is online libraries you can join for a one month "FREE" trial then cancel at the end of the month. The rest usually charge a modest fee from $15-$20 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download view and print.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.carlsalter.com/download.asp?p=1722
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://mybikemanuals.com/harley-davidson/
https://bikez.com/motorcycles/harley-davidson_fxr_1340_super_glide_1987.php
https://en.wikipedia.org/wiki/Harley-Davidson_Super_Glide
https://www.6ya.com/how-6ya-works to speak to me personally.

Motorcycles | Answered Yesterday


Hi, Mike you need to repost your question under the Zhejiang Yongjiang ATV category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered Yesterday


Hi, Anonymous before you start it in the morning, pull the spark plugs and sniff them. Do they smell like gasoline? Are they wet? If so, you may have fuel leaking past the needle and seat in the carburetor and flooding the cylinders.
Use a voltmeter on the battery an hour after you shut the bike off. It should be at least 12.6 volts. Check it again in the morning. It should still be 12.6 volts or more. If not, something could be drawing current when the key is off.
If it's a carbureted bike and the ambient temperature is warm, you may be over-using your choke/enrichner. Try cranking it with the choke turned off first and then try half-choke, and then full choke. If you start with too much choke it will flood. After it starts, shut the choke off after 15 - 30 seconds and then use the throttle to keep the bike running until it warms up. Over-using the choke will soot up your spark plugs.
A fresh set of properly gapped spark plugs can make a lot of difference in how easily a bike starts.
Engines need a richer fuel mixture when they're cold. An intake leak can also cause hard starting because it leans out the air/fuel mixture.
After you get the bike started, spray some WD-40 or carb cleaner around the carburetor intake manifold seals. If the RPMs change, you have an intake leak.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.apriliaforum.com/forums/showthread.php?321287-Fly-125-Starting-Problem
https://www.youtube.com/watch?v=t0q2K13jSrg
https://www.manualslib.com/manual/455509/Piaggio-Fly-150-4t.html#product-Fly%20125
https://www.motorcyclespareparts.eu/en/piaggio-parts/scooters/fly-125-4t-e3
https://www.manualslib.com/manual/1586814/Piaggio-Fly-125-Ie.html

Motorcycles | Answered Yesterday

Not finding what you are looking for?
2005 Husaberg Fe 650 e Logo

Popular Tags

3 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Husaberg Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6386 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Bill Boyd

Level 3 Expert

53812 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Fe 650 e Husaberg

  • Fe 650 e Husaberg

Most Popular Question

05 fe650 new head gasket new water pump

  • Motorcycles
Loading...