20 Most Recent
2003 Cagiva Mito 125 Evoluzione Questions & Answers
IVE PUT MY CLUTCH BACK TOGETHER AND ITS WONT WORK
have you checked that the clutch plates have been placed correctly
and that the cable has the correct length, It should have a max of 5mm Slack so it fully dis-engages when let go
Also if clutch plates are not correct it wont work, you should start with a friction plate with odd groves, Then steel spacer, then next friction plate till you end up with last plate being a friction plate
The last plate is also a plate with odd groves/design
unlike the plates in between which are all similar
Electric starter not working
To begin with you will have to check the battery cables if they are properly secured to the battery terminals and tht they are clean and having a good contact.
Locate the solenoid switch of the starter and jump the wires and see if the starter will turn..this switch should be around the battery area or best follow the positive wire of the battery and you may locate it.
Important of all is also to check if the battery ahs 12volts or more!
Hope this helps!
Not finding what you are looking for?