20 Most Recent 2011 Harley Davidson FLSTC Heritage Softail Classic - Page 2 Questions & Answers

BCM or speedometer voltage too high. Follow this link and you will find a forum discussion with a link to a PDF file. Some is in French but keep reading to about page 5 or 6 and it gives English code description http://www.v-twinforum.com/forums/electrical-wiring-lighting/213380-fault-code-b2272.html

Remove the bolt from the joint. Don't lose the thin washer inside the joint. Always replace the cotter pin with a new one

Check the engine codes (I posted how to do that a while ago) and get back with me.

As Heritage Softails don't have radios, you should follow the amp manufacturer's directions or the radio manufacturer's directions.

IIRC, it's in the speedometer housing, right? There's one nut that holds it on from the rear, and I think it's tabbed in the front, or you will see how it hooks up when you lift it. Then it should be fairly simple to get at from behind. Let me know if I'm mixed on this, I can't recall exactly how the 2011 is, but it should be close to the older ones.

Easy,you need to loose the nut on the top of the dash console,then pull up the dash console and remove the connection wires ! Thats'it.