20 Most Recent 2011 TVS XL Super Questions & Answers


Hi,
  • Kjsdhkjfdsjhfjvhsfor this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your K despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk01Tv3h3BlPdsabT2n8B6ccFzNFhzg:1597850987871&source=univ&tbm=isch&q=2011+tvs+xl+super+wiring+diagram&sa=X&ved=2ahUKEwi006TkyqfrAhWoTDABHbsXBDYQsAR6BAgIEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=cvytheA0J5c
https://www.scribd.com/document/338543965/Manuals-XL-Super-and-HD-pdf
https://safexbikes.com/wholesale/products/motorcycle-parts/TVS/vehicle/SUPER%20XL
https://www.tvsmotor.com/customers/User-Manual

2011 TVS XL... | Answered on Aug 19, 2020


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your TVS, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.vicky.in/faqs/tvs-xl-super/what-is-the-tyre-pressure-for-tvs-xl-super/#:~:text=A%20%3AThe%20tyre%20pressure%20of,is%2025%2035%2025%2040.
https://www.scribd.com/document/338543965/Manuals-XL-Super-and-HD-pdf
https://www.tvsmotor.com/customers/User-Manual

2011 TVS XL... | Answered on Aug 07, 2020


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking check for spark leakage in the dark
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Dirty air filter.
10. Intake air leak.
11. Water, dirt, or rust in the fuel system.
12. Carburetor contaminated, sticky float, plugged jets.
13. Carburetor has oil in the bowl due to excessive oil in pre-mix.
14. Carburetor vacuum diaphragm torn, cracked, not seated or installed improperly.
15. Multiple carburetors out of sync.
16. Fuel filter clogged.
17. Old or contaminated fuel.
18. Fuel tank vent system plugged or carb vent line closed off.
19. Gas cap diaphragm valve faulty.
20. Vacuum line from the intake manifold to fuel valve is broken, cracked, pinched, or missing.
21. Carburetor controls misadjusted.
22. Incorrect valve timing.
23. Valve springs floating, weak, or broken.
24. Damaged intake or exhaust valve.
25. Incompatible performance parts.
26. The control module may be in "LIMP" mode
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?source=univ&tbm=isch&q=TVS+XL+Super+misfires&sa=X&ved=2ahUKEwjIt5qqyNDqAhXETN8KHZeICD4QsAR6BAgJEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=ElXB1ET9Qbo
https://www.motorcycle-manual.com/tvs/
https://safexbikes.com/products/motorcycle-parts/TVS/vehicle/SUPER%20XL
https://www.manualslib.com/manual/1222527/Tvs-Tvs-Xl-100.html

2011 TVS XL... | Answered on Jul 16, 2020


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your TVS, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.youtube.com/watch?v=LtxadaVwGsg
https://www.youtube.com/watch?v=lFBS5vN8jvw
https://www.scribd.com/document/338543965/Manuals-XL-Super-and-HD-pdf
https://safexbikes.com/products/motorcycle-parts/TVS/vehicle/SUPER%20XL
https://www.fuelarc.com/bikes/tvs/xl-super-heavy-duty/user-manual/

2011 TVS XL... | Answered on Jul 15, 2020


Duplicate question already answered

2011 TVS XL... | Answered on Jul 10, 2020


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery damaged or nearly discharged, should have 12.5 volts.
4. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or the fuel line is closed off, restricting fuel flow.
10. Choke valve inoperative.
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk02v3Z5B2cDqCyYlImRlDagctJYqvQ:1594362304766&source=univ&tbm=isch&q=2011+TVS+XL+Super+hard+to+start&sa=X&ved=2ahUKEwjWica2hsLqAhViTd8KHdebBP4QsAR6BAgFEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=_CeDfMu3eVI
https://www.motorcycle-manual.com/tvs/
https://safexbikes.com/products/motorcycle-parts/TVS/vehicle/SUPER%20XL
https://www.manualslib.com/manual/1222527/Tvs-Tvs-Xl-100.html

2011 TVS XL... | Answered on Jul 10, 2020


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your TVS, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk02NQY0PPhumM1QHnX2U5SvWq0TShA:1593246598870&source=univ&tbm=isch&q=2011+TVS+XL+Super+remove+the+rear+wheel&sa=X&ved=2ahUKEwj1scKMyqHqAhWDTN8KHVyWDssQsAR6BAgKEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=jbQp8mLZU4U
https://www.scribd.com/document/338543965/Manuals-XL-Super-and-HD-pdf
https://safexbikes.com/products/motorcycle-parts/vehicle/SUPER%20XL/0
https://www.fuelarc.com/bikes/tvs/xl-super-heavy-duty/user-manual/

2011 TVS XL... | Answered on Jun 27, 2020


Hi, Anonymous the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain specs-fluid requirements and capacities and wiring diagrams in the back pages. Another "FREE" source is online libraries you can join for a one month "FREE" trial then cancel at the end of the month. The rest usually charge a modest fee from $15-$20 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download view and print.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://4-stroke.net/620-honda/honda-sl70/downloads/451-honda-sl70-service-manual
https://www.partsfish.com/page/oem-parts-for-honda
http://www.sunnymeadcycles.com/files/1970HondaCT-70_Owners.pdf
https://www.cyclechaos.com/wiki/Honda_SL70
https://en.wikipedia.org/wiki/Honda_70

2011 TVS XL... | Answered on Jun 24, 2020


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery damaged or nearly discharged, should have 12.5 volts.
4. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or the fuel line is closed off, restricting fuel flow.
10. Choke valve inoperative.
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk01IEnbDqvDmTmMJMufR7XrdXV2evg:1593020065594&source=univ&tbm=isch&q=Starting+trouble+tvs+excel+-+2011+TVS+XL+Super&sa=X&ved=2ahUKEwjHtISZ_prqAhVQdt8KHeGqBaMQsAR6BAgHEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=answdof6tfc
https://www.motorcycle-manual.com/tvs/
https://safexbikes.com/products/motorcycle-parts/vehicle/SUPER%20XL/0
https://www.fuelarc.com/bikes/tvs/xl-super-heavy-duty/user-manual/

2011 TVS XL... | Answered on Jun 24, 2020


good question there isnt much info on this online it does appear that you should have a 1 liter capacity of reserve tank so given that u should have a reserve the best i can suggest is on most motorcycles it tends to be all the way anticlockwise is on all the way clockwise is reserve and in the center is off other than that im afraid i cant be of much help but if im wrong keep checking here someone might have a batter answer for you

2011 TVS XL... | Answered on Nov 30, 2012


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. A failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, stator, magneto, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Faulty neutral, side stand or clutch lever safety switch.
10. Faulty or corroded kill switch.
11. Accelerator pump damaged or not working.
12. Water or dirt in the fuel system, carburetor or filter.
13. Restricted, blocked or kinked fuel line.
14. Fuel tank empty.
15. The gas cap is not venting properly or fuel tank venting system blocked, loosen the gas cap and go for a test ride.
16. A failed fuel pump, pressure regulator and or fuel injectors.
17. Vacuum line from the intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
18. Needle and seat stuck closed in the float bowl.
19. Petcock clogged or damaged.
20. Lean angle switch is faulty or needs adjustment.
21. Catastrophic engine failure, perform a compression test.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.quora.com/Why-does-my-bikes-engine-stop-when-it-is-slowed-down
https://www.reddit.com/r/GooglePixel/comments/5a4s21/my_pixel_xl_suddenly_died_during_use_and_wont/
https://www.manualslib.com/manual/1222527/Tvs-Tvs-Xl-100.html
https://safexbikes.com/products/motorcycle-parts/TVS/vehicle/SUPER%20XL
https://www.fuelarc.com/bikes/tvs/xl-super-heavy-duty/user-manual/

TVS XL Super... | Answered on Mar 19, 2020


optimum ratio is 14 -15 : 1
this is obtained by the idle jetting and the position of the throttle butterfly

TVS XL Super... | Answered on Feb 26, 2016


a19c2b88-c959-463d-a8a4-9d38f27f9661.jpgtry it..

TVS XL Super... | Answered on Apr 16, 2014


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your TVS, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day
.https://www.xbhp.com/talkies/motorcycle-ownership-experiences/4832-apache-rtr-fi-700.html#:~:text=The%20correct%20inlet%20and%20exhaust%20clearance%20are%200.07mm%20and%200.11mm.
https://www.youtube.com/watch?v=poGFJGmc-70
https://uploads.tapatalk-cdn.com/files-571/Apache20RTR2020020Service20Manual20pdf.pdf
https://www.bikedekho.com/tvs/apache-160/spare-parts-price.htm
https://www.manualslib.com/manual/930017/Apache-Rtr-180.html

TVS Motorcycles | Answered on Jul 05, 2020


Hi, Abhinav for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Tappet Clearance Checking And Adjusting TVS Apache RTR Four Stroke...
Diy video to check and adjust valve clearance in 2 valve system 100cc...
http://fullmanuals24.com/brand/tvs
Shop At TVS STAR SPORTS Bike Parts And Accessories Online Store safexbikes...
https://www.tvsmotor.com/pdf/Manuals-TVS-Sport.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



TVS Motorcycles | Answered on Nov 19, 2019


Hi, Shivaji before diagnosing your blown fuse issue, check the bottom of your seat, if it's metal and comes in close proximity to the positive battery post you need to take the necessary steps to ensure there is no contact (electrical tape, thick rubber insulation, hammer a dent in the seat bottom etc.) You are going to need a wiring diagram from your service manual, a test light, an ohmmeter and plenty of extra fuses.
If you turn on your ignition switch and immediately blow a fuse you have a hard/dead short and is usually easy to find. With a test light connected to the hot side of the blown fuse holder start stabbing the wire/s that leads away from the fuse holder and towards the ignition switch, you test light will illuminate validating the short. When the test light fails to illuminate you have passed the short and need to back up until the test light illuminates, then look in the immediate area for the short.
If you driving down the road for 30 minutes or 15 miles and blow a fuse you have soft/flying short and may take some time and patience to find.
If the main fuse/circuit breaker constantly blows/trips while riding you probably have a faulty battery terminal connection. Check battery terminals for damage or corrosion, check battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary. Any other fuses that constantly keep blowing while riding are usually caused by a loose or corroded ground wire in the circuit, which means you have to check, inspect, test each and everyone with an ohm meter set on a low ohm scale 100 ohms or less . Simply touch one lead to the ground source and the other lead to the battery negative terminal, a reading of zero indicates a clean solid ground. Any number reading or infinity indicates a poor ground and needs to be repaired. Poor or weak grounds require excessive additional amperage to complete the circuit which in turn blows the small amperage fuse.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
TVS Scooty Pep Occasionally not starting accelerating Team BHP
Why Does the Main Fuse Blow and Not Lower Amp Fuse
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
Shop At TVS SCOOTY PEP Bike Parts And Accessories Online Store safexbikes...
TVS Scooty Pep Plus Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

TVS Motorcycles | Answered on Aug 27, 2019

Not finding what you are looking for?
2011 TVS XL Super Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top TVS Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

rfredey

Level 2 Expert

145 Answers

john h

Level 3 Expert

23438 Answers

Are you a TVS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

XL Super TVS

  • XL Super TVS

Most Popular Question

tvs excel motor bike wiring diagram

  • Motorcycles
Loading...