20 Most Recent 2011 PGO GMax 220 EFI Questions & Answers

2011 PGO GMax... | Posted on Nov 13, 2019 | Be the first to answer

2011 PGO GMax... | Posted on Oct 05, 2017 | Be the first to answer

PGO Motorcycles | Posted on Nov 13, 2019 | Be the first to answer

PGO Motorcycles | Posted on Nov 13, 2019 | Be the first to answer


An engine, in order to start, needs a good cranking speed, good compression, the right amount of fuel inside the cylinder at the right time and a good spark at the right time.
An engine that doesn't start has one of those things missing and it is pointless guessing which.

The spark plug is probably the easiest to check to begin but it is folly to replace it without checking the spark as part of the process.

PGO Motorcycles | Answered on Aug 21, 2019

PGO Motorcycles | Posted on Jun 25, 2019 | Be the first to answer


Take it back to where you bought it!
4_24_2019_10_54_09_pm.jpg

PGO Motorcycles | Answered on Apr 24, 2019

PGO Motorcycles | Posted on Aug 17, 2017 | Be the first to answer

PGO Motorcycles | Posted on May 18, 2017 | Be the first to answer

PGO Motorcycles | Posted on Mar 17, 2016 | Be the first to answer

PGO Motorcycles | Posted on Feb 26, 2016 | Be the first to answer


motors need three things to run. Fuel, Oxygen, and Ignition (spark).
If you leave motorcycles set for a long time, the gas in the carburetor will turn to lacquer. If that is the case no fuel will get to the spark plug. Spraying starting fluid in the air cleaner or carb can prove this, and it will start and run for a couple seconds then die.
If you can smell gas, you have either no spark or it may be flooded. If you don't have spark, find out if there is a blown fuse, or a shorted wire.

PGO Motorcycles | Answered on Feb 28, 2015


I doubt there is one. There will be installation instruction, if that is what you mean, online. Try the gargler; Google it.

Motorcycles | Answered 11 hours ago


http://modularmotorcyclehelmet.com

Motorcycles | Answered on Jan 23, 2021


what car or truck has a neutral light we ask??

Motorcycles | Answered on Jan 21, 2021


from where we ask?? carb? inlets are sticking or float settings too high

Motorcycles | Answered on Jan 17, 2021


If it is a wasted spark coil then it depends on whether electronic ignition or points based.

Motorcycles | Answered on Jan 17, 2021


You have a vacuum leak, check the intake and carb mounting gaskets if it revs as you say you should be able to hear the hiss. I hope this helps. Take Care.

Motorcycles | Answered on Jan 16, 2021


?? ???????? ???????????????? $26 ???? ???? ?????????? ?????????? ?????? $?? ???????? ?????????? ???? ???????? ?????????????? ???????????? ???????? ????????. ?? ???? ?? ???????? ???????? ?????????????? ?????????????? ?????? ???????? ?????????????? ?????? ?? ???? ?? ?????? ?? ??????. ?????????????????? ???????? ?????? ???????? ?????? ?????? ???? ???????? ?????? ???????? ????????..........www.Acashkit.com

Motorcycles | Answered on Jan 15, 2021


Take it to a main dealer and they can fit a new switch and pair it with the ECU if needed.

Motorcycles | Answered on Jan 13, 2021

Not finding what you are looking for?
2011 PGO GMax 220 EFI Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2008 PGO Big Max 50
2008 PGO Big Max 50

4 Questions

2008 PGO GMAX 50
2008 PGO GMAX 50

3 Questions

2006 PGO TRex 150
2006 PGO TRex 150

2 Questions

2007 PGO HOT 50
2007 PGO HOT 50

2 Questions

2011 PGO XHot 150 Carb
2011 PGO XHot 150 Carb

2 Questions

Top PGO Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Vernon Taylor

Level 3 Expert

7441 Answers

ray gallant

Level 3 Expert

71004 Answers

Are you a PGO Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Supermotard 125 DD Reduced PGO

  • Supermotard 125 DD Reduced PGO

Most Popular Question

pgo t rex 125cc wont start gas clean

  • Motorcycles
Loading...