20 Most Recent 2010 Diamo LS200 Questions & Answers

Diamo... | Posted on Mar 19, 2020 | Be the first to answer

0 Answers

Diamo... | Answered on Aug 30, 2015

2 Answers

I got a gs650 katana 1983 with harness is all messed up so I ordered one off of eBay will the plugs that are on the new one don't plug in to nothing from the parts like the rectifier and the igniter could you help me out with the wiring situation please

Send it back and get a proper one from a Suzuki dealer.

Did the owner tell you why the wiring loom is all messed up? It is often the indication of a stolen bike.

You need the Service Manual

https://motoservicemanual.com/suzuki-gs650-1981-1983-service-manual/

This one says FREE

https://www.carlsalter.com/download.asp?p=2492

WIRING DIAGRAMS

https://www.google.com/search?q=gs650+katana+1983+wiring+diagram

..

Motorcycles | Answered Yesterday

0 Answers

Good day po! merun po ba dyan sa inyo na my line 6 pod hd 300? yung sa akin nawala kasi yung isang IC na 8 pins malapit na malapit sa master volume control. surface mointed po sya. paki share po ng number ng IC para maayos po uli ang nasirang gadget po thanks

Motorcycles | Posted 2 days ago | Be the first to answer

1 Answer

Torque on the front axle fringe nut

Let's guess you have a Harley Davidson 1200 rather than a Yamaha 125 dirt bike

The front axle nut torque spec is considerably lower than the rear axle nut. The factory service manual lists the front axle torque spec as 70 to 75 foot pounds.Jun. 11, 2018

Check Front Axle Nut Torque ' Fix My Hog

More examples

https://www.google.com/search?q=Torque+motorcycle+front+axle+nut

..

Motorcycles | Answered on Feb 23, 2021

1 Answer

My magna engine runs , it can go into gears but it won't move ..

Clint you have to change the filter or the fluid

Motorcycles | Answered on Feb 21, 2021

0 Answers

GSF 600 TURNS OVER BUT WONT START

Motorcycles | Posted on Feb 21, 2021 | Be the first to answer

0 Answers

I have a 2005 r1 neutral light don't come on and it turns over but won't start diagnosis says 21. 19 ?

Motorcycles | Posted on Feb 21, 2021 | Be the first to answer

1 Answer

Zontes Tiger 125 Fuel level issue. Following on from the last post because I could not send more than one photo at a time. This is the connector mentioned in the first post. Thanks.

https://www.google.com/search?q=Zontes+Tiger.+fuel+gauge+level+sender

..

Motorcycles | Answered on Feb 19, 2021

1 Answer

These come from the loom to the gauges on my Zontes Tiger. My fuel gauge wasn't working as I found out after putting 5 lts petrol in. Further back behind the carb is a plastic connect it with 2 male spades in. If I connect a wire from the green one in it to the yellow one in this picture the fuel gauge needle goes to full. I drained the fuel and this is still what happened. Is it the gauge, wiring or sender please ? Thanks.

The issue is with the sender unit in the tank. In my day you opened the tank can and looked in, or you sloshed the bike left and right and listened to the tank.

Motorcycles | Answered on Feb 19, 2021

1 Answer

Im sure this was asked but I'm not seeing a direct answer. Why won't my EversTart 750 Jump Starter / Compressor charge ?

It's an EversTart, not an EversMart (I edited it) and you have posted it to the Category Motorcycles. No one has answered because of those two errors. What you are seeing is Suggested Answers.
The most likely reason is that the internal battery has failed. Or if it was really really flat, like 6 months flat, Lithium Ion batteries do a strange thing, the protection circuit won't let it charge. The trick is to get inside it and connect the internal battery to your car battery, plus to plus, negative to negative for about an hour. Then connect it back up and charge inside the unit. If that doesn't bring it up over the threshold, you need a new internal battery.

https://www.google.com/search?q=Why+won%27t+my+eversmart+750+charge

..

Motorcycles | Answered on Feb 19, 2021

1 Answer