20 Most Recent 2010 Yamaha XJ6 Questions & Answers

Ok I have same showing on my dash

The most likely "Type of gold" would be A heat resistant paint from a company such as "SPEREX" . Don't forget to degrease ,the area to be painted, very well or the paint will just biubble and fall off.

If your battery is more than a year old it needs to be replaced. Otherwise, it could need some distiller water to bring it up to proper levels. Check corrosion on the battery terminals and cables. After that, it is your charging system. Voltage rectifier, voltage regulator and possibly the stator coil each need to be checked. If you don't know how to check these, bring it in to the shop.

Remove the spark plug and flush out the excessive OVERFLOW OF FUEL as the engine failed to start. Unless this is flushed out the overflow of fuel with the dampness will not fire the cylinder.
Also check on the spark intensity with the plug as it must be good.
If not check the HT coils and the HT wires, check the incicent voltage on the HT coils for the coil trigger which must be fluctuating 12 volts.
This must start the engine if the timing is correct.

You might try looking it up at colorrite.com
I have never used their paint so I don't know if its any good. I asked a rep at one time what it was (enamal, urethane, laquer, etc.) and he just gave me a line of BS

But you may be able to find something on their site and go to an automotive paint supplier local to you and have it crossed over.

you either have a major air leak(that you would hear) or the turbo is getting a bit old.Also check the turbo oil lines.Make sure they are feeding so the turbo can spin.Hope this helps

Not mentioned in the Service manual http://www.badrad600.com/Yamaha_Radian_Factory_Service_Manual_OCR.pdf https://www.google.com/search?q=1986+Yamaha+YX600+Radian+remove+USA+speed+restriction Something like this?

Removing 95bhp restriction ' Yamaha Star Cycle V-Max ...

vmaxforum.net https://www.vmaxforum.net > threads > removing-95bh... Jan 14, 2013 - Air jets could easily become blocked. Step 3: Removing the speed restriction. On the back of the speedo-needle a disc with two different . ..

Check the diagrams here https://www.google.com/search?q=yamaha+sega+81+firing+order ..

Question edited for a lot more clarity, add maker. Question moved to Yamaha Motorcycle. Unlikely to be a carburetor problem as this appears to be fuel injected! https://www.google.com/search?q=Yamaha+Mio+125+MX+no+start ..

Make sure the fuel is getting to the valve and passing through it. Possible blockage in fuel line or in the tank.

It isn't called a Magneto, that was for really old bikes. It is a 'stator'. Service manual https://drive.google.com/drive/folders/1OFbBW2YhLpL1-Xbsw9vexi84Y7aXGTdG Parts List https://www.cmsnl.com/yamaha-rt100-1990-l-usa_model9624/partslist/ https://www.google.com/search?q=1990+yamaha+rt100+wiring+diagram ..

First make sure that the new battery has been fully charged and is not defective. Next make sure that the proper voltage is reaching the started. You may have a bad post connection or loose connection at the starter. Try jumping you battery with another known good battery.

Above the master cylinder on each brake.

Your Service Manual is here

service-manual-yzf-r15.pdf

Ridertua https://ridertua.files.wordpress.com > 2011/04 > se... To help identify parts and clarify procedure steps, there are exploded diagrams "3" at the start of each removal and disassembly section. • Numbers "4" are ... 338 pages ..