Top 20
2009 KTM 250 SX - Page 4 Questions & Answers
Exhaust flange
The ring is too keep the pipe from damaging the cylinder.
The o-ring on the pipe is what seals it from leaking.
Noise release clutch
remove the chain and check all links are free , check the rear wheel bearings are spinning free and not notchi ! check condition of sprockets teeth not worn !
Noise release clutch
Check rear wheel bearings. Be sure the chain is adjusted and lubricated properly.
Hard shifting
sounds like you bent a selecter fork in gearbox ! need to strip engine and check all parts inc cogs and bearings !
How do I rewind a250sxf ignition stator
rewinding a stator is not difficult, find the right wire, better is square wire, as the heat conductance is better. If you select the same diameter you get automatically approximately the same amount of windings as the original. The sell the wire on Amazon and other places, Bing is your friend.
Petcock Valve
If the bolts are spinning you will have to drill off the bolt heads and extract the threads from the base inserts. Replace the petcock base o-ring, epoxy the base nuts into the tank body, install petcock. Or replace tank and valve. It's a choice of time or money.
Ktm 625 wont idle when hot
Sounds like idle jets are still clogged, they are really small and unless you check them, a standard cleaning of the carbs may not clear them. I use a nylon bristle pulled from a scrub brush to **** out the pilot jets.
Ktm
buy one from your dealer.
Not finding what you are looking for?