20 Most Recent
2009 Keeway Outlook 150 - Page 5 Questions & Answers
I need a left rear motor and hex plate for a lil rider model 80-901. where can it be bought?
Finding specific replacement parts for toys like the Lil Rider model 80-901 can sometimes be challenging, especially if they are older models or from lesser-known manufacturers. Here are a few steps you can take:
1. **Manufacturer's Website:** Check if Lil Rider has an official website or customer support contact. They might offer replacement parts or guidance on where to find them.
2. **Online Marketplaces:** Websites like eBay, Amazon, or specialty toy parts websites sometimes carry replacement parts for various toy models. Search using specific keywords like "Lil Rider 80-901 left rear motor" or "hex plate replacement."
3. **Toy Repair Shops:** Local toy repair shops or hobbyist stores might have or be able to source such replacement parts. They often have connections or knowledge about where to find specific components.
4. **Contact Retailers:** Reach out to retailers that sell Lil Rider products. Even if they don't have the part in stock, they might be able to order it for you or provide information on where to find it.
5. **Forums and Online Communities:** Sometimes, enthusiasts or hobbyists who work with similar toys might offer advice or know where to find rare parts. Websites or forums dedicated to toy enthusiasts could be helpful.
6. **Consider Alternatives:** If the exact part isn't available, exploring alternative components that might serve a similar function could be an option. However, this might require some modification or adaptation.
Remember, when searching for replacement parts, providing as much detail as possible about the part needed, including measurements, model numbers, or any identifiable markings, can increase the chances of finding the correct component.
1/2/2024 6:55:30 PM •
Motorcycles
•
Answered
on Jan 02, 2024
How to remove filter and clean it?
Year Make Model of the motorcycle please?
Please always include that information as first three words. Then they are thousands of motorcycle categories listed by;
make year model = Suzuki 2003 GSXR1100
If it is the foam type filter, put Dawn Dish Detergent on it, wash out the dirt, dust and oil. Keep squeezing under running water until the water runs clean. Leave to dry. Then spray it with Oil Filter Oil and replace the filter. For paper filters, just replace them if they look dirty.
99-0516 K&N Air Filter Oil - 12.25oz - Aerosol
K&N
https://www.knfilters.ca > 99-0516-air-filter-oil-12-25...
K&N 99-0516 is a 12.25 ounce aerosol can of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton ...
US$15.99 · In stock
..
12/12/2023 11:42:00 PM •
Motorcycles
•
Answered
on Dec 12, 2023
Is both wires n the plug the same on voltage regulator
In a voltage regulator plug, the wires may not necessarily carry the same voltage. The voltage regulator is a component in a vehicle's electrical system that controls and regulates the voltage produced by the alternator, ensuring a consistent voltage output to the battery and other electrical components.
In the plug of a voltage regulator, there are typically multiple wires, each serving different purposes and carrying different voltages. For instance:
1. **Voltage Input and Output Wires:** These wires might differ in voltage. The input wire connects to the alternator or battery, carrying the higher voltage that needs regulation. The output wire, connected to the electrical system, carries the regulated voltage for the vehicle's operation.
2. **Ground Wire:** This wire is crucial for completing the circuit and ensuring proper functioning of the voltage regulator. It does not typically carry a voltage; instead, it serves as the return path for the electrical current.
3. **Sensing Wire:** In some regulators, there might be a sensing wire that monitors the system voltage. This wire doesn't usually carry a high voltage but rather acts as a feedback mechanism for the regulator to adjust its output.
It's important to identify and understand the wiring configuration of the voltage regulator plug, as incorrect connections or wiring can lead to electrical issues or even damage to the vehicle's electrical system. Referencing the vehicle's service manual or wiring diagrams specific to the make and model can provide accurate information about the voltage levels and the purpose of each wire in the voltage regulator plug.
12/10/2023 4:28:15 AM •
Motorcycles
•
Answered
on Dec 10, 2023
Vacuum Cleaner - 25.2V Battery not charging question
Either battery is not fully charged or battery require replacement. As you said you have already ordered new charger, charge your battery at full level with original charger. If problem persists then battery needs replacement.
11/3/2023 1:45:09 PM •
Motorcycles
•
Answered
on Nov 03, 2023
I removed key switch on a 2008 yamha star 650 when I put it in gear it shuts off
Here are some possible causes:
Low idle RPM: If your idle RPM is set too low, the bike may shut off when you put it in gear. You can consult a manual to see what the RPM should be.
Side stand switch: Most bikes have a safety switch that shuts down the engine if the side stand is still out. Check if the side stand is still out and if it is, try putting it up.
Clutch lever switch: Most bikes have an electrical switch in the clutch lever as a safety feature so that you can't start it in gear unless the clutch is in. This switch could be faulty.
Safety control box: This box checks all the safety features and kills the engine if needed. It could be faulty.
It's best to take your bike to a professional mechanic who can diagnose and fix the issue for you unless you can check off each of the above as the problem.
https://www.manualslib.com/manual/833178/Yamaha-Xvs650.html
10/27/2023 5:55:15 AM •
Motorcycles
•
Answered
on Oct 27, 2023
Not finding what you are looking for?