20 Most Recent
Questions & Answers
I need to adjust the
If your bike is like most others you loosen the bolt going through the shift lever under the shaft that lever attaches to. You may have to completely remove bolt and spread by inserting screwdriver into gap below shaft. Now pull lever off shaft and put it back on either higher or lower as you desire.
Honda Hope 150...
on Aug 01, 2011
Honda dream excess
<a href="https://portabledownloads.com/maxon-cinema-4d-studio-r22-with-crack/ "> Maxon Cinema 4D </a>
Maxon CINEMA 4D Studio R22 With Crack
Introduces powerful new tools, opportunities, and improvements in modeling, animation, and shading. The perfect package for all 3D artists, both beginners and professionals. It has a wide range of tools and resources to quickly achieve impressive
"> Pixologic Zbrush </a>
on Nov 03, 2020
Valve adjustment Honda Unicorn 160
A too tight tappet adjustment can do more than reduce mileage - it effectively changes the valve timing and can lead to burned valves and seats.
It is best not to prejudge such situations - it is generally believed the expansion of metals when the engine is at working temperature causes the tappet clearance to reduce. This isn't always the case when an aluminium cylinder head is used. Aluminium expands a much greater amount than steel and so working temperature can cause the valve clearances to increase.
on Oct 30, 2020
1989 VT 250. What causes engine surging?
This sounds like it may be a vacuum leak. When more air than normal is leaking into the engine, the idle will be higher than normal. The easiest way to find a vacuum leak is to take some carburetor cleaner or WD-40 and spray it around the areas where you suspect a leak may exist. If the engine idle goes up when you spray, there is a leak around that area.
on Oct 29, 2020
Not finding what you are looking for?