Top 20 2007 Suzuki RMZ 450 Questions & Answers


the valve clearance may be too tight

2007 Suzuki RMZ... | 137 views | 0 helpful votes


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/1016166-oil-leak-from-behind-front-sprocket/
https://www.youtube.com/watch?v=GwHKmG-ziC8
https://www.manualslib.com/manual/1105563/Suzuki-Rm-Z450.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/

2007 Suzuki RMZ... | 60 views | 0 helpful votes


not for sure,but look on the frame right side almost under the frame,about mid way of the engine.

2007 Suzuki RMZ... | 126 views | 0 helpful votes


Hi, Anthony and the usual suspects are:
1. Excessive choke use.
2. High-speed riding style.
3. Idle speed improperly adjusted.
4. Dirty air cleaner element (may also affect idle speed).
5. Restricted fuel tank vent system.
6. Vacuum piston assembly malfunction.
7. Excessive accelerator pump output.
8. Plugged or restricted bowl vent.
9. Float level too high.
10. Loose carburetor jets.
11. Worn or damaged needle or needle jet.
12. Choke valve not seated or leaking.
13. Plugged air jets or passages.
14. Low air pressure in the tires.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/302238-fuel-consumption
http://www.fuelly.com/motorcycle/suzuki/rmz450/all
https://www.manualslib.com/manual/896004/Suzuki-Rm-Z450.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

2007 Suzuki RMZ... | 60 views | 0 helpful votes


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/859077-torque-setting-for-2006-rmz-450
https://www.ltr450hq.com/forums/engine-efi-drivetrain/23760-head-bolt-torque-specs.html
http://www.crservice.dk/Suzuki%20cross/RM-Z450/RM-Z450K8_01A.pdf
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

2007 Suzuki RMZ... | 1,077 views | 0 helpful votes


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/915688-450-nothing-but-coughingstator-pics
https://www.youtube.com/watch?v=NSV8iU65bH8
https://www.manualslib.com/manual/896004/Suzuki-Rm-Z450.html
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

2007 Suzuki RMZ... | 199 views | 0 helpful votes


The seal in the water pump has gone bad and is letting water get into the oil. The oil turns grey when water gets emulsified with the oil. The pump will need a new seal, "O" ring and gaskets. Go to this website to see an exploded view of the pump assembly; www.babbittsonline.com tombones49_289.gif

Suzuki XTC 125... | 189 views | 1 helpful votes


Probably caused by a clutch fault - failing to clear...

Suzuki... | 728 views | 0 helpful votes


Hi, Kyle and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking check for spark leakage in the dark
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Dirty air filter.
10. Intake air leak.
11. Water, dirt, or rust in the fuel system.
12. Carburetor contaminated, sticky float, plugged jets.
13. Carburetor has oil in the bowl due to excessive oil in pre-mix.
14. Carburetor vacuum diaphragm torn, cracked, not seated or installed improperly.
15. Multiple carburetors out of sync.
16. Fuel filter clogged.
17. Old or contaminated fuel.
18. Fuel tank vent system plugged or carb vent line closed off.
19. Gas cap diaphragm valve faulty.
20. Vacuum line from the intake manifold to fuel valve is broken, cracked, pinched, or missing.
21. Carburetor controls misadjusted.
22. Incorrect valve timing.
23. Valve springs floating, weak, or broken.
24. Damaged intake or exhaust valve.
25. Incompatible performance parts.
26. The control module may be in "LIMP" mode
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.volusiariders.com/threads/front-cylinder-misfires-rough-idle-sputters-and-dies.208907/
http://www.intruders-alert.com/viewtopic.php?t=3612
https://www.manualslib.com/manual/1142694/Suzuki-Vs700.html#product-Intruder%20VS800
https://www.partsfish.com/page/oem-parts-for-suzuki
https://www.manualslib.com/manual/611701/Suzuki-Vl800.html

Suzuki... | 23 views | 0 helpful votes


Hi, Derrick for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.answers.com/Q/What_is_the_firing_order_82_suzuki_gs1100
https://www.gixxer.com/threads/firing-order.1007/
https://www.manualslib.com/manual/1482926/Suzuki-Gs1100g-1982.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Suzuki... | 28 views | 0 helpful votes


Hi, Michael before you can diagnose any electrical component in the Starter Circuit it is "IMPERATIVE" your battery must be fully charged to 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have a preliminary reading of 12.5 volts but little or zero amperage, the battery is faulty and must be replaced. Your starter motor stays engaged because the solenoid positive plunger contact plate/disc has spot-welded itself to the negative contact shoes usually caused by low battery voltage, faulty starter relay, or button. Your starter motor has two main systems the motor itself and the starter solenoid which transfers high amperage to the motor enabling it to turn over your engine, your issue only involves the starter solenoid and may be repaired without removing the starter in most cases and depending on the model of your Harley may require removing the rear exhaust pipe if it's in the way. The solenoid is the part that has a large copper stud protruding from it that the positive battery cable connects to. Start by disconnecting the battery negative cable and wrapping the cable terminal with any kind of tape so it will not accidentally touch metal and make all electrical circuits hot again, remove the starter solenoid cap, secured with 3 screws 1989 and later or 2 screws 1988 and earlier, with a screwdriver break away the contact plate from the shoes and clean/dress all electrical arc residue. In order to diagnose the starter circuit, you must start with a fully charged battery, 12.5 volts or better and be able to pass a proper load test if necessary. The battery cables and terminals must be clean and tight. The "NEGATIVE" cable is famous for corroding and or breaking inside the harness, check the terminals at both ends. Check your starter relay with a test light for continuity, it could be faulty due to corrosion and sticking in a closed configuration, another claim to fame. Finally, there is the starter solenoid, low battery voltage or faulty battery connections will cause extremely high amperage at the plate and contact shoes and rob the hold in coils of much-needed voltage. In extreme cases, the solenoid plunger plate will literally spot-weld itself to the contact shoes, keeping the circuit closed and thus permanent engagement. Another scenario is unacceptable voltage drop to the starter solenoid from the ignition switch to the starter relay to the starter button, and finally to the solenoid. Remove the green wire from the starter solenoid and hook up the positive lead of your voltmeter to the green wire connector and ground the negative lead. Turn on the ignition switch and depress starter button, the voltage reading should be no more than 1/2 volt less than the battery voltage. If it is more than 1/2 volt you need to backtrack that part of the circuit with your voltmeter until you find the voltage robbing offender. Next, remove the solenoid plunger, dress the plate and the contact shoes of arching residue and make sure the contact shoes are tight and secure. If you have done all of the above, replace the green starter button wire, hook up your voltmeter to the battery and check the voltage drop when you start the engine, anything below 9 volts could indicate a faulty battery and a proper load test should be performed.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1181142460
https://www.youtube.com/watch?v=S-qMPvhQXb8
https://www.manualslib.com/manual/1165889/Suzuki-Ls650-Savage.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://www.savageriders.com/verslagen/transfer/2002_LS650P_Owners_Manual.pdf

Suzuki... | 22 views | 0 helpful votes


Hi, Harry for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://gstwins.com/gsboard/index.php?topic=56939.0
https://www.youtube.com/watch?v=42KDHFQR0bs&app=desktop
https://www.youtube.com/watch?v=GxS5yZ44AHU
https://www.manualslib.com/manual/791753/Suzuki-Gs500-F.html
https://www.partsfish.com/page/oem-parts-for-suzuki
https://litetek.co/docs/Manual_Owners_Suzuki_GS500F.pdf

Suzuki... | 18 views | 0 helpful votes


Hi, Harry RB stands for Road Bike

Suzuki... | 18 views | 0 helpful votes


Shifting forks or othr part at issue..buy a clymer or haynes manual for that ol bike

Suzuki... | 37 views | 0 helpful votes


Connect an OBDII code reader into the diagnostics to read the fault code!
Fix the fault and then reset the codes!
If the fault is fixed the vehicle will be driveable again!

Suzuki... | 26 views | 0 helpful votes


Hi, Allen you may have a wiring problem for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.ezautoremote.com/instrument-cluster-what-to-do-when-they-dont-work/
https://www.google.com/search?source=univ&tbm=isch&q=Suzuki+boulevard+c50+wiring+diagram&sa=X&ved=2ahUKEwjB3pyEpO3pAhXHTN8KHYjGDoUQsAR6BAgKEAE&biw=1440&bih=757
https://www.manualslib.com/manual/1042330/Suzuki-Vl800.html
https://www.partsfish.com/page/oem-parts-for-suzuki
https://www.manualslib.com/manual/611701/Suzuki-Vl800.html

Suzuki... | 26 views | 0 helpful votes

Not finding what you are looking for?
2007 Suzuki RMZ 450 Logo

Popular Tags

11 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6385 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

XTC 125 Suzuki

  • XTC 125 Suzuki

Most Popular Question

suzkie rmz 450 fuel injection starts

  • Motorcycles
Loading...