20 Most Recent
Questions & Answers
Look for vacuum leaks in hoses and gaskets. If you feel comfortable I would remove it and rebuilt it. Could be the float is sinking because it has a hole in it. Parts are relatively cheap but hard to spec out. Should have a number on the carb body that the shop will want in order to find the parts. May be a number on the bike, not the model number. Check the book if you have it or ask a shop where it would be. Do not use wire to clean out ports!. I use brake cleaner (green can).
My top boy's muffler is
The neww smell will go away in about 300 miles.
I would not modify this bike for speed. Learn enjoy be safe then get a more powerful model.
05 kymco bet&win 250 starting problems.
You need a new battery installed and have it at a full charge. If you needing to jump start it then the battery that is in it has gone bad. When you have the jumpers on all you are doing is giving it enough to turn it over a couple time that is why you need a new battery.
Brake lever travel
Check the pads for wear, they might need replacement. You should also check brake fluid level. And last you can bleed the brakes.
What is the the pressure for kymco midi xls
No pillion passenger - about 30 psi when the tyres are cold. The pressure rating should be on the tyre sidewalls. If it's in kg/cm3 or kPa just use an online conversion table to calculate psi.
8/12/2021 2:23:40 PM •
on Aug 12, 2021
Not finding what you are looking for?