20 Most Recent 2007 Jinlun JL 12513 Questions & Answers

Question edited for clarity and spelling, it is a 'Jinlun', not 'lum'. Question moved for Cars and Trucks to maker category. Made in China and generally regarded as disposable, they are $600 new. The pulse unit will be on one end of the crankshaft. Check the parts suppliers for a parts diagram, or here https://www.yumpu.com/en/document/read/19210652/jinlun-jl50qt-5-reservedele-scootergrisen Service Manual https://www.google.com/search?q=jinlun+jl50qt-5-00+service+manual https://www.google.com/search?q=jinlun+JL50QT-5-00 ..

jinlun 125 manual. https://www.motorcycle-manual.com/jinlun

check the charging system by puttng a multi meter across the battery with it set on >20volts dc ,it shouldn't go above 14.4 volts with the engibe revving at half throttle if it does change the regulator/rectifier they are non servicable .also make sure your bulbs are the right voltage im guessing 12 volts but as you have not said what bike it is im unsure.what make and model is it ??

The lift cables on a 1993 model 2693 Hilo camper are 30 feet,2 3/4 inches long and fit the standard height lift of 11 feet 8 inches high to the top of the overhead. The lift uses two cables. According to a Hi- Lo camper travel trailer forum, cable replacement is basically the same on all years and models, with the main difference being the length of the cables from model to model. You can use a cable cut chart to find what cable length you need for your camper, and you'll need to know your year, model name, and box (body) length: Lift cables typically wear out after three to five years, so it's important to replace them as needed and keep them regularly maintained.

Check fuel delivery ,or fuel filter

The bike doesn't exist as written. https://www.google.com/search?q=410JS+1000cc+santana We are better with 'year make model 1000cc'. Better to not try and do better than the bike engineers. A mechanical pump runs when the engine is turning, an electric pump will run as soon as the key is turned and create pressure all the time. It would have to be an in tank electric pump or it will burn out. Electric pumps are cooled an lubricated by the fuel passing through it. If it is a carbureted engine, you are pressurizing the carb bowl. If injected, it may already have a fuel return. Check the mechanical pump for a torn diaphragm, they are easy to change. ..