20 Most Recent 2006 Zongshen GS 250 - Page 4 Questions & Answers


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.quora.com/What-is-the-reserve-fuel-capacity-of-Yamaha-FZ-S-V2-Fi#:~:text=The%20FZS%20has%20a%20reserve,requirement%20is%20just%20a%20rumor.&text=Approximately%20it%20will%20be%201.7L.
https://www.bikewale.com/yamaha-bikes/fazer-2009-2016/specifications-features/
https://www.manualslib.com/manual/615796/Yamaha-Fazer.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/656425/Yamaha-Gladiator.html#product-Fazer

Motorcycles | Answered 2 days ago


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day.
https://www.youtube.com/watch?v=Au9VC0oTpkQ
http://www.mediafire.com/file/65o6mbkdq5ty8ke/99_to_05_Harley_Softail_Service_Manual.pdf/file
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/service/document/6300
https://www.6ya.com/how-6ya-works to speak to me personally.

Motorcycles | Answered 2 days ago


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.majestyusa.com/forums/viewtopic.php?f=11&t=6452
https://www.manualslib.com/manual/597174/Yamaha-Majesty-400.html?page=24
https://www.motorera.com/motorcycle-service-repair-manual/Yamaha/Majesty
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/597174/Yamaha-Majesty-400.html

Motorcycles | Answered 2 days ago


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Improper valve clearance (too tight)
17. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
18. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
19. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
20. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections are loose or connected to the wrong cylinders.
21. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
22. Faulty neutral, clutch, kickstand safety switch.
23. Faulty fuel pump or fuse or relay.
24. Faulty or corroded run/stop switch.
25. Tilt sensor needs a reset.
26. Security system not disarming alarm needs a reset.
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.killermotorsports.com/scooter-power-no-start/
http://www.scooterfocus.com/scooter_troubleshooting.html
https://www.youtube.com/watch?v=bdMbAQzmGrA
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
https://www.scooterpartscatalog.com/vento-scooter-parts.html
https://absolutelyscooters.net/pdf/CGEN_dawg_scooter_manual.pdf

Motorcycles | Answered 2 days ago


Hi, Joseph for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day.
https://www.youtube.com/watch?v=tCpNIehX_l8
http://www.mediafire.com/file/sd4zyxhle38ddrb/1978-1984_Harley_FX_%2526_FL_service_manual/file
http://www.harleyclasica.es/wp-content/uploads/manuales/1941-84-HD-FL-FLH-Parts-Catalog.pdf
http://mybikemanuals.com/harley-davidson/
https://www.6ya.com/how-6ya-works to speak to me personally.

Motorcycles | Answered 2 days ago


Hi, Anonymous you need to repost your question under the Honda Water Pump category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 2 days ago


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://vintage-and-classic-hondas.456789.n3.nabble.com/how-to-set-timming-on-1982-cb750-nighthawk-td3206169.html
https://www.justanswer.com/motorcycle/2by54-adjust-cam-chain-1982-honda-night-hawk-motor.html
https://www.manualslib.com/manual/804798/Honda-Nighthawk-Cb-750-1991.html#product-1999%20Nighthawk%20CB750
https://www.partsfish.com/page/oem-parts-for-honda
https://www.manualslib.com/manual/1165379/Honda-Cb750-Custom-1982.html

Motorcycles | Answered 2 days ago


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk00xFDOh439QAvgsREVMoCs2RYWUug:1601191062855&source=univ&tbm=isch&q=1991+harley+ignition+wiring+diagram&sa=X&ved=2ahUKEwj6-ZLE5YjsAhWPo1kKHVWtDxUQjJkEegQIDBAB&biw=1440&bih=757
http://www.mediafire.com/file/6b1dhde35ukpnnc/84_to_98_FL-FX_Harley_Service_Manual.pdf/file
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/service/document/6300
https://www.6ya.com/how-6ya-works to speak to me personally.

Motorcycles | Answered 2 days ago


Hi, Anonymous you need to repost your question under the Yamaha ATV category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 2 days ago


Hi, Anonymous you need to repost your question under the Roketa ATV category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 2 days ago


Hi, Madison and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking check for spark leakage in the dark
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Dirty air filter.
10. Intake air leak.
11. Water, dirt, or rust in the fuel system.
12. Carburetor contaminated, sticky float, plugged jets.
13. Carburetor has oil in the bowl due to excessive oil in pre-mix.
14. Carburetor vacuum diaphragm torn, cracked, not seated or installed improperly.
15. Multiple carburetors out of sync.
16. Fuel filter clogged.
17. Old or contaminated fuel.
18. Fuel tank vent system plugged or carb vent line closed off.
19. Gas cap diaphragm valve faulty.
20. Vacuum line from the intake manifold to the fuel valve is broken, cracked, pinched, or missing.
21. Carburetor controls misadjusted.
22. Incorrect valve timing.
23. Valve springs floating, weak, or broken.
24. Damaged intake or exhaust valve.
25. Incompatible performance parts.
26. The control module may be in "LIMP" mode
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/1030915-01-ttr125-low-end-misfire-stalling/
https://www.youtube.com/watch?v=WQqKtrs5K7s
https://www.yumpu.com/en/document/view/26340827/yamaha-ttr-125-2004-repair-manual-carfsm
https://www.partsfish.com/page/oem-parts-for-yamaha
https://ownersmanuals2.com/yamaha/ttr125-2003-owners-manual-64942

Motorcycles | Answered 2 days ago


Hi, Anonymous you need to repost your question under the Honda ATV category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 2 days ago


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://cbrforum.com/forum/general-tech-9/how-reset-ecu-954-a-136363/
https://www.manualslib.com/manual/814669/Honda-Cbr954rr-2002.html?page=115
https://www.manualslib.com/manual/814669/Honda-Cbr954rr-2002.html
https://www.partsfish.com/page/oem-parts-for-honda
https://ownersmanuals2.com/honda/cbr954rr-2002-owners-manual-60907

Motorcycles | Answered 2 days ago


Hi, Lawsondrumcl you need to repost your question under the Unilli ATV category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 2 days ago


Hi, Anonymous and the usual suspects are:
1. Faulty sending unit.
2. Faulty wiring between the sending unit and light
3. Fuel light circuit grounded.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.bikechatforums.com/viewtopic.php?t=306627
https://www.yxztalk.com/threads/flashing-fuel-gauge-with-fuel-in-the-tank.62156/
https://manualzz.com/doc/922869/yamaha-neo-s-yn50-service-manual
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/659577/Yamaha-Neo-S-Yn50.html

Motorcycles | Answered 2 days ago


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Triumph, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk02QeITaF0BhzKsATEh5Wj0F0GqGSg:1601189490187&source=univ&tbm=isch&q=Triumph+900+triple+gearbox+diagram&sa=X&ved=2ahUKEwjt957W34jsAhVJk1kKHfZrAWQQjJkEegQICRAB&biw=1440&bih=757
https://www.youtube.com/watch?v=lBlnK2mYmzk
https://www.triumphriders.nl/FoldersPDF/Daytona_900-1200_(1993-1997)_Service_Manual_(eng).pdf
https://www.triumphestore.com/
https://www.triumphmotorcycles.com/offers-and-services/manuals

Motorcycles | Answered 2 days ago


Hi, Anonymous you need to repost your question under the Honda Car category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 2 days ago


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk02xO85e4tNuj-D6Y-eNmY78UIhYcw:1601189051014&source=univ&tbm=isch&q=honda+wave+100+wiring+diagram&sa=X&ved=2ahUKEwi2-umE3ojsAhXPs1kKHe4yCrwQjJkEegQIChAB&biw=1440&bih=757
https://www.pinterest.ph/pin/456904324698436688/
https://piesuccesadd.files.wordpress.com/2015/10/honda-wave-100r-service-manual.pdf
https://www.partsfish.com/page/oem-parts-for-honda
https://yolaops.hatenablog.com/entry/2020/03/06/040721

Motorcycles | Answered 2 days ago


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day.
https://www.youtube.com/watch?v=CeAUAYYO5b8
http://www.mediafire.com/file/y8au34oc778d7oc/2009_Harley_Dyna_Service_Manual.pdf/file
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://ownersmanuals2.com/harley-davidson/fat-bob-2009-owners-manual-66578
https://www.6ya.com/how-6ya-works to speak to me personally.

Motorcycles | Answered 2 days ago

Not finding what you are looking for?
Motorcycles Logo

19 questions posted

Ask a Question

Usually answered in minutes!

Top Zongshen Experts

Joseph Coppeto
Joseph Coppeto

Level 3 Expert

360 Answers

Tom Chichester

Level 3 Expert

57399 Answers

Terry
Terry

Level 3 Expert

11377 Answers

Are you a Zongshen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

985 C3 V4 Zongshen

  • 985 C3 V4 Zongshen

Most Popular Question

container clean filler

  • Motorcycles
Loading...