20 Most Recent 2006 Malaguti F15 Firefox Mechatronic Questions & Answers

It sounds like you might have an electric/cordless speedo, what could cause it to jump while at a stand still when you rev the engine could be a bad connection in the instrument cluster where the voltage from your tachometer is affecting your speedometer. Try to see if any of the speedo or tacho wires are cracked, burned, melted, or just simply not grounded. Like I always say, badly grounded wires can create unmentioned problems.

2006 Malaguti... | Answered on Apr 17, 2014

1 Answer

Wont start

there are 3 main needed parts to make
any engine run
(1) fuel air mixture
(2) compression
(3) ignition
if you have all 3 then as long as the timing is right
the engine will run

2006 Malaguti... | Answered on Oct 19, 2013

0 Answers

Malaguti grizzly 12 wont tick over without the choke on has the morini franco S6-E air cooled engine in it any help would be great thanks

pilot jets blocked take carb off and put it in an ultrsonic cleaner then blow jets off with airline

Malaguti... | Answered on Jan 20, 2015

1 Answer

Where do i put 2 strock oil on malaguti phantom f12 100cc 1999

In the oil box. don't you know!. How shame!

Malaguti... | Answered on Aug 12, 2012

2 Answers

I got a gs650 katana 1983 with harness is all messed up so I ordered one off of eBay will the plugs that are on the new one don't plug in to nothing from the parts like the rectifier and the igniter could you help me out with the wiring situation please

Send it back and get a proper one from a Suzuki dealer.

Did the owner tell you why the wiring loom is all messed up? It is often the indication of a stolen bike.

You need the Service Manual

https://motoservicemanual.com/suzuki-gs650-1981-1983-service-manual/

This one says FREE

https://www.carlsalter.com/download.asp?p=2492

WIRING DIAGRAMS

https://www.google.com/search?q=gs650+katana+1983+wiring+diagram

..

Motorcycles | Answered Yesterday

0 Answers

Good day po! merun po ba dyan sa inyo na my line 6 pod hd 300? yung sa akin nawala kasi yung isang IC na 8 pins malapit na malapit sa master volume control. surface mointed po sya. paki share po ng number ng IC para maayos po uli ang nasirang gadget po thanks

Motorcycles | Posted 3 days ago | Be the first to answer

1 Answer

Torque on the front axle fringe nut

Let's guess you have a Harley Davidson 1200 rather than a Yamaha 125 dirt bike

The front axle nut torque spec is considerably lower than the rear axle nut. The factory service manual lists the front axle torque spec as 70 to 75 foot pounds.Jun. 11, 2018