Top 20 2015 Suzuki RM-Z 250 - Page 4 Questions & Answers


Ignition components probly worn..sparkcables old on inside..coil shud b testd..module or points also. Compression cud b bad. Fuel flow may b hinderd or contaminated. First make sure batt is at 12.6v no less. If that hasa kikstart..replace batt w a capacitor thats sold at harley stores. Will b freestartn like a lawnmower

Suzuki... | 88 views | 0 helpful votes


Check if power is leaving solenoid to starter while cranking. If starter is getting power to it's power terminal but not turning over,see if you can turn engine over by hand. Check sprage clutch assy into engine also. On my bike there is a flat washer spacer that can away into engine if I am not careful,can jam in gearing.

Suzuki... | 149 views | 1 helpful votes


Approx-85mph.

Suzuki... | 56 views | 1 helpful votes


Contact Suzuki to request it.

Suzuki... | 209 views | 0 helpful votes


Is the petcock "on"? No, I'm not being sarcastic. The filter in the tank (fuel pump) may be clogged. Because you said you have no clogs in the tank, you may have a clog in the fuel line itself. If you take the line off the carbs, does gas flow? If yes, your carbs may be dirty, and the gas is not able to run through the jets properly.

Suzuki... | 63 views | 0 helpful votes


Worngasket ir loose bolts..go ovr bike for othr maintenanc..rmembr ur doin sixti on twowheels

Suzuki... | 52 views | 0 helpful votes


Some dealerships can have the key cut from the VIN number, otherwise most locksmiths can cut a motorcycle key.

Suzuki... | 87 views | 0 helpful votes


Haynes manuals are the best to learn your ride inside out,every nut,bolt and direction to go. Even if you have never done one. Yard tapes use it when they get stomped. So beat em to it you'd be surprised in how simple ,maybe a pain in your short hairs but theory is...you can add to something,but you can't take away from it to work.

Suzuki... | 53 views | 0 helpful votes


If that bowl has never been removed before it's going to be stuck on there good.
If you have removed all the screws holding the bowl on (usually 4 screws, one on each "corner" of the bowl), then it may take some pulling to get it off.
The gasket is probably dried up and brittle so if you do get it off, realize you may need to get a new gasket as the old one make now leak after being pulled apart after more than 40 years.

Suzuki... | 71 views | 2 helpful votes


Batt bad or connection..testit for 12.6 n no less. Inspect ign system fir wornwires or module Buy a clymermanual for complete upkeep

Suzuki... | 40 views | 0 helpful votes


WASTED TYPING, YOU NEVER ASK ANY QUESTION.

Suzuki... | 43 views | 0 helpful votes


change spark plugs.....also check timing is correct or not...

Suzuki... | 65 views | 0 helpful votes


check plug conditions and plug gap,secondly try to adjust the air screw or cleaner the carburetor.

Suzuki... | 44 views | 0 helpful votes


Normally you can go up one size, measure the width of a friends 160 tyre and see if you have enough clearance, a good tyre dealer can also help and may have already done this modification.

Suzuki... | 346 views | 1 helpful votes

Not finding what you are looking for?
2015 Suzuki RM-Z 250 Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6523 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RM-Z 250 Suzuki

  • RM-Z 250 Suzuki

Most Popular Question

fix suzuki 250rmz 06 wont kickstart

  • Motorcycles
Loading...