Harley Davidson Bullet 125 - Answered Questions & Fixed Issues


Hi, David, the answer to this question is way above my pay grade for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day. RADIO DIAGNOSTICS. 6.1 http://www.mediafire.com/file/b4h4jnz31f8r80d/2008+Harley+Davidson+Touring+Models+Service+Manual+.pdf http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc https://ownersmanuals2.com/harley-davidson/electra-glide-classic-2008-owners-manual-66558 https://www.6ya.com/ to speak to me personally

2008 Harley... • Answered on Apr 09, 2021 • 88 views


Possible that the starter pinion gear has come off or the pinion itself is not throwing out to engage on the ring gear. You may have to take the starter out to check and confirm. The solenoid which sits above the starter motor operates the pinion. It throws out the pinion shaft to engage the gear and the starter motor itself, spins it. Once the engine has started, the solenoid retracts the shaft and gear back and away from the ring gear.

2009 Harley... • Answered on Sep 23, 2019 • 50 views


sounds like a problem with the ignition switch. Does anything get power when you turn the key on? Headlights? Did you change the bars before or after the problem started? Is the handlebar harness plugged in correctly?

2008 Harley... • Answered on Jan 28, 2019 • 98 views


smaller rim diameter special made shorter springs ( have to fit shorter shocky) talk with bike modifiers for more ideas

2011 Harley... • Answered on Nov 21, 2017 • 133 views


an engine ,any engine , suffers at idle there is low coolant circulation , low oil pressures , low charge rates and if it is left idling for any length of time ( more than 10 minutes ) early engine failure can be expected besides wasting fuel for 60 minutes what is the point of letting it idle yes the oil is burnt from the overheating and it will need a service now

2011 Harley... • Answered on Aug 09, 2017 • 58 views


The data bus has bad connections somewhere or a relay or switch is making poor contact. Could be in the wiring harness or in the ECU, or any one of the other modules. The fact that it gets the indication to the speedo is marginally encouraging. Try pulling the main fuse under the seat for 30 seconds and plug it back in, see if it clears the code. If it does but the code comes back, either take it to dealer if under warranty or start tracing connections and cleaning tightening them, I'd start at the ECU and work back from there.

2008 Harley... • Answered on May 23, 2017 • 441 views


common, check antenna, and ground, may need a new one Michael

2008 Harley... • Answered on Oct 05, 2016 • 247 views


Try your local library they have car and motorcycle manuals.

2009 Harley... • Answered on Sep 20, 2015 • 131 views


2009 Harley... • Answered on Jun 25, 2015 • 219 views


check to see if there is a pedal brake light switch for the rear brake if so check out that switch as well

2008 Harley... • Answered on Jun 25, 2015 • 275 views


Maybe the fob needs a new battery.

2009 Harley... • Answered on Mar 19, 2015 • 88 views


In general, a halfway decent HD service department will plug in their Scanalyzer, tell you what the trouble code is and what it means and reset the ECM at no charge. If they want to charge you for doing this, then find another dealer. My daughter is a board certified physician and she makes less than half of what these blood suckers charge per hour.

2008 Harley... • Answered on Mar 06, 2015 • 145 views


Take out the old one and put it in. Take the cover off, don't break the light, but it probably pushes in turn to the left, the right and then pops out when you buy the new light look at it, see if it has two little nipples sticking out

2009 Harley... • Answered on Feb 23, 2015 • 41 views


EBay or Amazon.com around $35 brand-new

2011 Harley... • Answered on Feb 23, 2015 • 243 views


Get some good electrical cleaner spray displays that connection scrubber with alcohol, make sure the fuses good and try again pulled a plug-in out, even though you charge the battery make sure the battery has 12.67 V of starting juice. How was your battery may be needed. New battery

2008 Harley... • Answered on Feb 23, 2015 • 327 views


Will you said it right there replace if you take out the old ones. You should not put in the new ones, the ones probably come with some sort of directions. It can't be that hard

2011 Harley... • Answered on Feb 23, 2015 • 181 views


Is in your bike still under warranty, wanting taken back to the Harley dealer, if not find out if your speedometer cable is a cable or not, I'm not sure

2011 Harley... • Answered on Feb 23, 2015 • 191 views


If you bought this new there should be directions and relatively simple, as long as it's made for a Harley

2008 Harley... • Answered on Feb 23, 2015 • 100 views

Not finding what you are looking for?
Motorcycles Logo

147 questions posted

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6647 Answers

Mike

Level 3 Expert

4376 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1189 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...