Buell Motorcycles - Recent Questions, Troubleshooting & Support


Any lender requires insurance if the vehicle is financed.

2008 Buell 1125R | Answered on Jan 18, 2021


Bent shift fork - requires internal service work. Costly and time consuming. Don't let em fall over to avoid this sort of problems with ANY bike.

2000 Buell M2... | Answered on Jan 15, 2021


I have had two Buell Ulysses from a Brisbane Harley Dealer and have put a total of 80 000km on the two of them. I can tell you that if you have an after-market exhaust installed (EG Jardine, etc) then surging and backfires are the name of the game. Power Commander and other replacement EFCs are not the answer either (because no proper solution was in place before they stopped Buell's production). I do run a Jardine on my current model and putting in the noise limiter has made for smoother running. Also...Buell's are subect to vibration in the bars. I installed anti-vibration weights in the bar-ends and voila'...no vibration...just great as I can now see my speedometer...LOL. I hope any of this is of some use to you. I LOVE my Buell. I've been riding over 50yrs, I've owned dozens of bikes, motorcycles are my daily ride and this is my favourite machine (followed close behind by my Hayabusa).

Buell V2C 250 T... | Answered on Jul 06, 2020


Hi
Make sure you have fresh fuel in it
Check the fuel system for contamination (water or sediment)
If the bike has been laid up then check the carb jets & airways are clear

Ride Safe
Bike-Doc

2001 Buell Blast | Answered on May 03, 2020


If the lights dimand the battery is known good, The starter is pulling too much of a load. Remove the starter and bench test with some jumper cables to see if it drags. If not, e engine is not locked up. Remove the spark plugs and tsee if it cranks over with the starter before pulling the starter.If it is humming, You have an excessive load. Good Luck, Ned

2004 Buell... | Answered on Mar 21, 2019


CHECK THE GASKETS BUT IF I WAS YOU I TAKE IT TO A MECHANIC ASAP.

Buell... | Answered on Feb 26, 2019


It sounds like the spark plug hole in the head may be damaged. Can you get the plug out to check? Plugs should always be removed when the engine is cold, especially with aluminium cylinder heads. If you can get the plug out and the threads are damaged you can a shop to put in a Heli-Coil to repair the threads.

Buell... | Answered on Jan 16, 2019


 THERES A LEVER UNDER THE TAIL END  PULL TOWARDS THE CLUTCH SIDE OF THE BIKE AND LIFT UP ON THE BACK OF THE SEAT AT THE SAME TIME AND BAMM ITS OFF HAPPY RIDING 

2003 Buell Blast | Answered on Dec 30, 2018


You may need to rejet the carborator. If has been rejeted make sure the float has properly been reinstalled.

Buell Buell... | Answered on Nov 04, 2018


Sounds like vapor lock. Is your fuel line touching your cyclinder head or nearly touching?

2008 Buell 1125R | Answered on Nov 04, 2018


BUELL WORKSHOP MANUAL

2004 Buell Blast | Answered on May 27, 2018

Not finding what you are looking for?
Buell Logo

1,274 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Buell Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6528 Answers

Brian Anderson

Level 3 Expert

399 Answers

Are you a Buell Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...