ZIL Cars & Trucks - Page 5 - Recent Questions, Troubleshooting & Support
If I hook a trickle charger to a car will it do less damage to the car than a regular charger?
In general terms, the least amps the better. High amps causes heat and gassing but is a trade off in time.
2 amps, your battery will be nicely charged in 12 hours. 50 amps will charge in an hour, although a Booster is for jump starting a car. It is unlikely that it is charging at 50 amps. I have a good charger and it is a 2 amp / 12 amp charger. I put it on 12 amps for an hour and then 2 amps overnight.
Overcharging, or boost charging can cause over heating and buckling or the internal plates, but a short high amps charge does help to remove sulphate scale from the plates.
..
6 Speed Crafts Riding Lawn Mower LT1000 Why gear shift won't move out of any Speed?
Let's troubleshoot this problem step by step:
Linkage Adjustment:
The issue might be related to the linkage between the shift lever and the transmission. Sometimes, the linkage can become bent, broken, or jammed.
Inspect the linkage carefully. Look for any signs of damage or debris that might be obstructing its movement.
If you find any bent or broken parts, consider repairing or replacing them. Also, ensure that the linkage is properly lubricated according to the user manual.
Purging the Transaxle:
Try purging the transaxle to ensure smooth operation. Follow these steps:
Place the mower on a level surface away from any obstacles.
Turn off the engine and apply the parking brake.
Disengage the transaxle by moving the freewheel control to the disengaged position.
Check for Mechanical Obstructions:
Inspect the area around the gear shift lever and the transmission for any obstructions.
Is there a fuse for my hyla
it look like you blow the fuse check the fuse for the radio as well as the inline for your amp on some amplifier there is a circuit
How to reset a innova 3100
To reset your Innova 3100 OBD2 code reader, follow these steps:
Verify the Connection:
Ensure that the tool is connected to the vehicle's Data Link Connector (DLC).
Confirm that the ignition is ON.
Turn Ignition OFF and ON:
Turn the ignition OFF.
Wait for 5 seconds.
Turn the ignition ON again.
This process will reset the computer. If you encounter any issues, refer to your Innova 3100 Owner's Manual.
INNOVA 3100 OWNER'S MANUAL Pdf Download ' ManualsLib
Not finding what you are looking for?