ZIL Cars & Trucks - Recent Questions, Troubleshooting & Support


You have this posted in the wrong product category. Please select another category appropriate to the problem.

Cars & Trucks | Answered 4 hours ago


how much do you have?

Cars & Trucks | Answered 5 hours ago


In the fuse box under the hood or in a box behind glove box.

Cars & Trucks | Answered 6 hours ago


truck configuration. mine vehicles have the driver low beside the chassis rail and the body of the truck is made to reduce the height of the vehicle to allow it to operate in tunnels.
outside trucks are set higher as there is no height restrictions required.

Cars & Trucks | Answered 6 hours ago


TRY ASKING YOUR LOCAL AUTO PARTS STORE OR A GOOD LOCAL MECHANIC

Cars & Trucks | Answered 6 hours ago


The Coronavirus is 0.3 microns in diameter so it is unlikely that an ordinary particulate mask (dust mask) will be effective in blocking the virus itself. The virus however is transmitted by airborne bits of spit and mucous expelled by coughing or sneezing individuals and the masks are reasonably effective in blocking that infection route. The most common transmission route for viruses is direct contact, as in an infected individual touching their nose or mouth and then touching a door knob, faucet, or other common surface, someone else using the same item, and then touching their nose or mouth, so it is advisable to wear latex or nitrile gloves and wash your hands frequently.

https://www.cnet.com/how-to/which-face-masks-protect-against-coronavirus/

Cars & Trucks | Answered 8 hours ago


You can replace just the lock cylinder, you have to remove the steering wheel and the lock plate to get to the retaining screw, see pics. I hope this helps. Take care.
5ff8bba7-73fe-4a23-906b-b174b1f0af9e-undefined-undefined-0.gif

79e62ceb-aa21-4541-bf88-874beccec52b-undefined-undefined-2.gif

Cars & Trucks | Answered 10 hours ago


I am not familiar with this model but you don't mention how old this car is. Pumping the accelerator works on last century cars with carbureters because they have an acceleration jet in the carbureters which squirts petrol into the engine to create the rich mixture needed for starting. I suspect that your car is probably newer than this and the engine management system doesn't know that the engine is cold. Check engine temperature sensors for correct operation and replace any that are not working correctly.

Cars & Trucks | Answered 14 hours ago


Hello MizzVirgo

I have edited your question and translated it into English!

Your vehicle is in 'Limp Mode'. The ECM, (the computer) has detected a problem so serious that it will not let you drive except to a garage to get it fixed. An engineer needs to connect it to a scan tool and find out why the engine light is on. It produces a code and that code determines what is wrong and how to fix it. Getting the code scanned takes 2 minutes and garages generally don't charge in the hope of getting the work. Make sure you ask them what the code is and then you can Google it like this.

Volkwagon Jetta code P0171

Volkswagen Jetta P0171 OBDII Trouble Code Diagnosis ...

www.700r4transmissionhq.com > p0171-volkswagen-jetta
Nov 20, 2018 - The P0171 code on a Volkswagen Jetta will often be thrown if the fuel injection system is not operating properly. Typically the code will be ...

Cars & Trucks | Answered 17 hours ago

Not finding what you are looking for?
ZIL Logo

Family Lines

2 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top ZIL Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23424 Answers

Are you a ZIL Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...