Vector M - Recent Questions, Troubleshooting & Support

Heater core is bad and will need to be replaced.

I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer. .. rest is up to u.. U can also get free manuals

Yes this is a high-price unit but it is very good I mean you could simply place a fan near your fireplace to blow the air before it goes out the chimney to make it more efficient but in all cases you should always have a carbon monoxide detector plugged in on both sides of the fireplace to make sure you're not introducing harmful gases into your breathing air

You can try to find the O.E.M. part, take one from an old junked light, or find a generic switch from the hardware store and make it work. You diagnosed the problem already. You could replace it with a regular (DC) switch if you normally "lock" it on most of the time. Miniature Pushbutton Switches You might just consider replacing it, as it seems there is risk for fire with this model. 1 000 000 Candlelight Spotlight fire

TCC solenoid is the most common problem. Have codes read.

Replace switch. you have already diagnosed problem. What is your question????

Search Results you can download the service manuals for your queries

Check power to ignitor, if you have power to ignitor, the ignitor may be faulty, or it's magnetic sensor is at fault.If you do not have power to the ignitor, you need to trace the circuit looking for breaks in the wiring, checking fuses, etc.

If I were you, I would get it serviced, that will cover things like you describe and ensure the smooth running for the season.

how to remove injectors Fuso Super Great 8M21

All questions in Cars and Trucks need 'year make model' please.But this could be a generator, chainsaw, leaf blower or mower in which case 'make model (what is is).On a vehicle, remove sparkplugs and try and turn the engine by hand using the big nut on the crankshaft pulley. Broken timing chain or belt and the piston is hitting the open valves. However, NO cars have a starter that has a belt, they are gear driven...

Try to diagnose the issue. That said, a professional mechanic with the diagnostic tools is likely needed. Restart the Vehicle: First, shut off the engine, wait for about 10 seconds, and then restart the vehicle. Sometimes, this simple reboot can reset any signal errors that might be causing the "reduced engine power" warning light. It's still a good idea to have a mechanic check it out. Since you've already changed the battery, it's essential to ensure that the new battery is functioning correctly. Check the battery connections, terminals, and cables. Also, inspect the electrical system for any loose or damaged wires. Fuel System: Verify that there are no fuel-related issues. Ensure that the fuel pump is working correctly, and there are no clogs or leaks in the fuel lines. Ignition System: The ignition system plays a crucial role in starting the engine. Check the spark plugs, ignition coils, and ignition control module. Faulty components in this system can prevent the engine from starting. Air Trapped in Cooling System: As suggested in one of the solutions, make sure there's no air trapped in the cooling system. Bleeding the air out can help maintain proper engine temperature and prevent starting issues. Remember that driving with the "reduced engine power" warning light on is not recommended.

You used a word that Fixya scripts didn't like and redacted. Is this a three wheel gadget for carrying golf clubs and begins with C and ends in Y and has a couple of Ds in it? They are often made by Golf Town and they supply parts. They are also available on Amazon.

Power out? Check your alternator fuse. In fact, check all your fuses. If no injector pulse, swap out the crank angle sensor. Use the link system to check the datalog for unual readings suggesting a ECU fault. If it won't crank, consider installing a push button starter --seriously. Problem with sunroof or turn signals, check relays. If you repost, expand on "powering out." GVR-4 - 91 Galant VR4 electrical issues ' DSMtuners.com

Question edited for clarity. Modern vehicle use the body control module to operate the horn. There is nothing in this link or in the manuals that make me think this vehicle has a horn relay. https://www.google.com/search?q=2006+hino+268+horn+relay+location Connect the horns to direct battery power to see if they work. https://www.google.com/search?q=2006+hino+268+horn+not+working ..