Cars & Trucks - Page 2 - Popular Questions, Answers, Tips & Manuals
6 Speed Crafts Riding Lawn Mower LT1000 Why gear shift won't move out of any Speed?
Let's troubleshoot this problem step by step:
Linkage Adjustment:
The issue might be related to the linkage between the shift lever and the transmission. Sometimes, the linkage can become bent, broken, or jammed.
Inspect the linkage carefully. Look for any signs of damage or debris that might be obstructing its movement.
If you find any bent or broken parts, consider repairing or replacing them. Also, ensure that the linkage is properly lubricated according to the user manual.
Purging the Transaxle:
Try purging the transaxle to ensure smooth operation. Follow these steps:
Place the mower on a level surface away from any obstacles.
Turn off the engine and apply the parking brake.
Disengage the transaxle by moving the freewheel control to the disengaged position.
Check for Mechanical Obstructions:
Inspect the area around the gear shift lever and the transmission for any obstructions.
What cause engine light troible codes p0303 and p0302?
What is the make, model, fuel type and engine size of your vehicle? These are both Misfire codes. Cylinder 2 and 3 are not burning fuel correctly. This could be caused by a few different things. It could be bad spark plugs, bad spark plug wires, faulty coil packs or faulty fuel injectors. Please comment below with your vehicle details and I'll try to help you more.
3/24/2024 5:51:05 AM •
Cars & Trucks
•
33 views • 0 helpful votes
Were is the horn located on my 2017 citroen dispatch
The most likely location for it is up under the front, left wing between the front wheel and the bumper. You might need to take the wheel arch liner out to get to it. If it's not there check the wheel arch on the other side. Another common location is behind the front bumper mounted on the bodywork crossbar between the radiator and the front grille.
2007 gt g6 all instruments on panel is flashing
A mechanic's scan tool would lbe necessary to check all the modules. The problelm could be either in the wiring or the control modules. There is also the chance the dimmer switch could be turned off or defective. Or, the electrical part of the ignition switch could be problematic. Because of the possibilities, use of the scan tool would seem the route to go.
4/18/2024 1:27:52 PM •
Cars & Trucks
•
21 views • 1 helpful votes
Not finding what you are looking for?