Toyota Previa - Recent Questions, Troubleshooting & Support - Page 8
How to change starter
alldata.com cover this
so does the FSM.
generic on all cars.
- pull the battery neg lug.
- gain access to starter, (that means objects in the way , remove 1st.
- remove the cables and wires for solenoid on starter.
- remove the 2 bolts holding starter to bell housing.
- starter falls out.
- reverse above.
change out, replace, etc
does the hot wire test pass? if yes, leave it alone.
see the tricks here, and all tests. all are very simple tests.
most changed out starters are good, because DIY dont test it right.
here are the tests.
http://www.fixkick.com/nocrank.html
How do i reset the change oil light in a 1992 toyota previa
You should be able to reset all trouble lights by disconnecting the negative side of the battery for 30 seconds. The problem with that is it will come back on if not addressed. It is most likely a sensor in your emissions that is causing this.
How to replace supercharger clutch pulley
The bolt is reverse threaded most likely and if the belt is on leave it on while you break the bolt loose. Once it is broken loose remove the belt then unthread the bolt the rest of the way and replace installation is the reverse of removal.
Not finding what you are looking for?