I would start looking into a ecu
You need to get a real code scanner and get the real trouble code, it sounds like a problem with your vtec soleniod, check your oil level for starters and let me know what the trouble code is
Non vtec motor... Scanner read manufactureres ignition sytem control or misfire
Non vtec motor.... Scanner code p1362
you say you changed the whole distrubutor assembly?
Yep everything.
If you messed with the timing belt , your timing is probly off, otherwise you may have the distributor installed 180' out this code is a tdc sensor not reading or reading incorrectly, be sure you put the same design distributor in, and all your wires are hooks up, and put number one cylinder on tdc, (compression stroke) and be sure the the distributor rotor is pointing to number one on the cap
Dizzy only goes on one way. wont go in 180' out. Havent taken timing belt off only dizzy. Same part number for old and new dizzy
×
387 views
Usually answered in minutes!
Need help with this 96 prelude wont go over 3000rpms , begins missing and chugging. Ecu throws a code(TDC sensor), have put on new distributor, plugz,wires, coil, rotor in dizzy, cap ,,still does it. HELP ME!!!!' PLEASE!!!
Need help with this 96 prelude wont go over 3000rpms , begins missing and chugging. Ecu throws a code(TDC sensor), have put on new distributor, plugz,wires, coil, rotor in dizzy, cap ,,still does it. HELP ME!!!!' PLEASE!!!
Need help with this 96 prelude wont go over 3000rpms , begins missing and chugging. Ecu throws a code(TDC sensor), have put on new distributor, plugz,wires, coil, rotor in dizzy, cap ,,still does it. HELP ME!!!!' PLEASE!!!
×