I cannot find the crankshaft sensor on my lincoln ls 2004 v6 i have been looking by my ac compressor is that right

It should be behind the a/c compressor on the engine block

Hi Danny,I have a 2004 Lincoln LS, 3.0 haven't had that problem so far,have 125.000 miles on it.Here's a video I found on your sensor,a lot of things are put on our engines that are hard to get to,like the spark plugs. Lincoln ls 2001 V6 3 0 temperature sensors YouTube

Click image for zoom...

Fig. Crankshaft Position (CKP) Sensor-3.0L Engine

Fig. Crankshaft Position (CKP) Sensor-3.9L Engine


Hope this helps (remember to rate and commet this answer).

Passenger side of crank pulley under ac compressor by pulley.

download full fiagram from here

Look in the area behind the AC compressor where the hoses bolt on. This can be done by removing a splash shield in front of the left wheelwell.

on back of air comp.

its probably the compressor cutoff switch cutting your compressor off at the wrong time and causing your ac to blow hot. that switch is under your hood right on top of the engine easy to get to. I hope that helps you out!

find the ac compressor,two lines come off the compressor,the large line/hose has the low side service port on it ,just follow the large ac line/hose untill u see it ur charge hose will couple on to it

In order to charge, you must locate the low pressure valve to install the refrigerant. The low pressure valve is between the compressor and the evaporator. Do not charge on the High Pressure side, The high pressure valve is between the compressor and the condenser. To locate the low pressure valve, follow the line that comes from the compressor and routes toward the firewall. The valve will be somewhere on that line. Do not overcharge. The amount of pressure that is needed on the low pressure side will depend on the ambient outside temperature.