Yo! Your battery doesnt have enough power to crank your engine.that has got to be a problem with your alternator.it is meant to charge your battery.please replace the alternator so it will charge your battery
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Before you threw a bunch of parts at it maybe you should at least see if it has spark. If it doesn't have spark then the crank sensor and coil pack would be appropriate. If it is not getting fuel then the fuel pump, filter, etc. would be the way to go. So see if there is spark, do this by pulling a spark plug and see if there is spark out the end with it plugged into the wire and cranking it over. If there is spark put all this back together and squirt some fuel into the throttle body while cranking it over, if it tries to start but doesn't try to start on its own without squirting fuel in it then the fuel pump is bad. How many miles on it? Possibly the cam timing is off. Maybe take a compression check and see if the cam is out of time.
if its got no fire and you changed your cam and crank sensor try replacing the ignition Coil then if it doesn't work replace the distributor cap and spark plugs and wires if that doesn't work then take the distributor cap off and replace the distributor Rotor if it still doesn't work replace the wires to the rotor if still i dosent work check your fuses but i assure you that should fix it.
Check for spark and gas. Try to add gas to the intake. If it starts, there is a fuel delivery problem. If it doesn't, then there may be no spark which you can test using a spark tester. If there is no spark, the crank sensor circuit may be at fault.
It's very likely your fuel pump has failed. Have somebody thump on the fuel tank while you're cranking the engine and see if it starts. If it does, replace the fuel pump. Otherwise get your fuel pressure checked, and check for spark. If no spark, check to make sure the distributor is turning(if applicable) If a 3.3 motor with no spark, suspect the crank sensor or cam sensor. Crank sensor is much easier to replace if experimenting.
O2 sensor won't cause a no spark no start condition but the crank sensor will. most time bad crank sensor will not set a code if engine doesn't start. usually set code on o drop while driving. I would check connection at sensor if good then replace sensor.
As a first course of action, I strongly suggest that you pull out one spark plug and connect on plug wire. You will need a little help here, put the spark plug tip on the engine and have it cranked by your helper. If there's no current then you definitely have a bad coil pack.
The coil pack gives current to the plugs to burn fuel. Your coil pack can be faulty that's why it only cranks but doesn't turn. Have it replaced and you'll be good.
Hope this helps and thank you for using FixYa! Have a good one!
×