Question about 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

Battery is fine but my 2005 Chevy silverado 2500hd will not start.

Posted by Marc on

Ad

1 Answer

kkjwrj2831

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Your ignition has probably gone bad easy to fix not cheap

Posted on Jul 24, 2011

  • Marc Jul 25, 2011

    But the truck was fine, the ignition didn't struggle to start. It made a clicking sounds when I turned the ignition, so that tell me that the starter is still working?

×

Ad

5 Related Answers

darin brown

  • 393 Answers

SOURCE: Dipstick tube

there is a bolt on/near the exhaust manifold, then you should be able to wiggle&pull out.

Posted on Nov 26, 2008

Ad
shop242

Tommy Moore

  • 214 Answers

SOURCE: chevy silverado 2500HD won't start after changing fuel filter

Fuel Pump may have took a poo.. ???

Posted on Mar 12, 2009

Anonymous

  • 1 Answer

SOURCE: Duramax Shuts off at 1000 rpms

I had the same problem and it ended up being the EGR Valve that was sticking.

Posted on Apr 28, 2009

Anonymous

  • 1 Answer

SOURCE: how do i replace the knock sensor on the 2005

which motor ?

Posted on Dec 18, 2009

cool78259

ruben sanchez

  • 228 Answers

SOURCE: my 2005 chvey 2500hd diesel truck will not start,

on the back of the engine close to the firewall by the glow plug controller is a high pressure oil switch. if this switch goes out diesel fuel will not reach the injector pump.try pulling the molex and jumping it out with a wire. if it starts. replace the switch. it takes an extra deep socket designed for that switch that can be purchased at any auto supply. good luck!

Posted on Jul 26, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 Chevy Silverado 2500HD. When I


heated seat eliment needs replaced. or unplog

Apr 01, 2010 | 2005 Chevrolet Silverado

2 Answers

My 2005 chvey 2500hd diesel truck will not start,


on the back of the engine close to the firewall by the glow plug controller is a high pressure oil switch. if this switch goes out diesel fuel will not reach the injector pump.try pulling the molex and jumping it out with a wire. if it starts. replace the switch. it takes an extra deep socket designed for that switch that can be purchased at any auto supply. good luck!

Mar 15, 2010 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

Have 2005 chevy silverado the intrument cluster lights stay on also the radio stays on and the battery light in the cluster is on ,replaced the igntion switch, the dome light go out when u shut the door...


I had the same problem. I had to check the fuses in the engine compartment, I then had to replace two 15 amp fuses, after I replaced the fuses the problem was gone.

Jan 10, 2010 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

2008 Chevy Silverado 2500 HD will not start


Are both batteries fully charged showing 12v? I ask this because I don't know if your friend's vehicle was charging. If it wasn't then when you put that battery back in your system it would reduce your overall voltage.

Jan 03, 2010 | 2008 Chevrolet Silverado 2500HD 2WD

1 Answer

2001 CHEVY SILVERADO 2500HD BATTERY LIGHT FLASHES INTERMITTENTLY. NO PROBLEM WITH BATTERY OR WITH ALTERNATOR, BOTH OF WHICH TEST OK. NO PROBLEM WITH STARTING OR RUNNING, EXCEPT FOR THE FLASHING BATTERY...


2001 chevy silverado 2500hd battery light flashes intermittently. no problem with battery or alterntor. both tested ok. no problems with starting or running. voltage gauge reads just above 14. no problems with anything except battery light flashes. what could be the problem?

Dec 04, 2009 | 2001 Chevrolet Silverado 2500HD

2 Answers

2005 chevy silverado won;t start.


i had the same problem, and it turned out the coil pack was moulding inside wich stopped the spark all together, i ended up changing my coil pack and putting on new wires because the ends connected to the coil were very corroded and that cures the not running part just fine


enjoy

Jul 01, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

2002 Chevy Silverado 4wd 2500HD noise


probaly dont have a problem your truck probaly has a gas engaged 4 wheel dr modual and what you hear is the gas modual engaging

Apr 03, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

Dipstick tube


there is a bolt on/near the exhaust manifold, then you should be able to wiggle&pull out.

Nov 26, 2008 | 2005 Chevrolet Silverado 2500HD 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

john h

Level 3 Expert

23504 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...