At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the vacuum line on the fuel pressure regulator for any sign of gas being sucked into the line. A failed regulator will let extra gas get into the engine. If it's okay, have the fuel pressure checked. That's sure a lot of gas, way too much for the engine. Good luck.
on the side of the engine near the oil filter is the crankshaft position sensor. some time those get heat sensitive .noamaly the sensor is not to pricey. so its more cost effective to just replace it.
In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to disarm the airbag system can result in an unexpected Airbag deployment and possible serious personnel injury disconnect the battery 30 minutes prior to start of work
is it the same seal? it sounds like something was not installed good, or a burr on the axle, i would get a second look at another garage to see exactly whats going on, then take it back to the shop that rebuilt it, if it the same seal it could be a defective axle, good luck hope this helps.
×