SOURCE: Ignition Switch spark shorted something.
its by the battery you have to use a 10mm to open it up
SOURCE: Could i use a complete
You would think yes but I doubt this. I have found that manufacturers change the wiring harnesses almost every year. The connectors would fit but there is no way to be sure if they are connecting the correct sensor and wires to the ECU input and output. You could ask a Honda Dealer or shop and they could compare the part numbers. Somewhere on those wiring harnesses there will be a part number and if the part numbers match then yes you could. The major issue is in the actual ECU connection. Again, those connectors could work but because you don't have anyway to verify the wiring by markings this is not a good idea. Other than using that harness to provide wires of the proper size to replace sections of the harness being replaced I would not try a straight up trade unless the dealer confirmed they are interchangeable.
35 views
Usually answered in minutes!
×