At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Land Rover Discovery II 1999 will go in reverse but...
Check transmission fliuid level. Transmissions work by having proper pressures. If the fluid level is too low there will not be enough pressure to engage it in gear. Then find your leak and fix it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi welcome main problems are the abs valves causing the 3 dash lights (search 3 amigos online) a really badly sited compressor can cause air suspension models to fail giving the bags a slow leak the V8 is a solid engine but can have radiator expansion tank and cap failures
the other issue is electrics windows and door looms are problematic
Does the starter spin? Has the battery been load tested? Are the battery cables clean and tight on the the battery posts? Check all this and you will likely find one of them to be the problem.
Sounds like the stop solenoid is playing up (smallish 27mm nut with wire(s) going to it located on the top of the high pressure pump)
They are quite cheap and straight forward DiY
The code P1451 on a Land Rover is "Leakage Detection Module Motor power stage error Drive cycle A:Signal out
of range - above maximum". This is an OBD-II diagnostic system code. As far as I know, a 1995 Land Rover Discovery does not use a OBD-II system. Is it possible that this rover is a later model year
No need for a diagram, to drain the oil, there's a drain plug on the bottom of the transfer box, under the handbrake drum. To fill, the fill plug is about in line with the centre of the handbrake drum and to the left. I think both plugs are 1/2" square. Fill to overflow with Texaco Multi-Gear 75W/90R. Takes about 2L or so.
×