Question about Land Rover Discovery
SOURCE: location of Charcol Canister and
The evaporative emission canister purge solenoid valve is a duty control type, which controls the flow of purge air from the evaporative emission canister.
Inspection 1. Look for loose connections, sharp bends or damage to the fuel vapor lines. 2. Look for distortion, cracks or fuel leakage. 3. After removing the EVAP canister, inspect for cracks or damage.
Posted on Sep 04, 2008
Here is what I could find for your code error as potential causes:
After market parts and accessories nonconforming to the EVAP system specifications.
Damaged, missing or improperly installed fuel filler cap.
Blockage in fuel vapor hoses/tubes (EVAP canister tube, EVAP canister purge outlet tube or EVAP return tube) in EVAP system.
Disconnected or cracked fuel vapor hoses/tubes in EVAP system.
EVAP canister purge valve stuck closed.
Canister vent (CV) solenoid stuck open.
Fuel tank pressure (FTP) sensor malfunction.
EVAP canister leaking.
Fuel vapor control valve tube assembly blocked.
Fuel vapor vent valve assembly blocked.
Obviously the gas cap would be the easiest and cheapest thing to fix. Just make sure it is put on correctly and tight. If it is not that, I would have to suggest to take it to a mechanic because the other problems on that list are not really DIY material. Hopefully it is the gas cap and you can take care of it yourself. Good luck.
Posted on May 17, 2009
P0452 Evap.Emission System-Pressure Sensor Low Input
The evaporative emission control system prevents hydrocarbon vapors from escaping from the fuel tank into the atmosphere where they could form photochemical smog. Gasoline vapors are collected in the charcoal canister. The Fuel Tank Pressure Sensor (FTPS) is an integral part of the evaporative monitoring system. The PCM monitors the FTPS signal to detect vacuum decay and excess vacuum. The FTPS measures the difference between the air pressure inside the fuel tank and outside air pressure to check the purge control solenoid valve operation and for leak detection in the evaporative emission control system by monitoring pressure and vacuum levels in the fuel tank during the purge control solenoid valve operating cycles.
Posted on Feb 12, 2010
Tips for a great answer:
May 15, 2017 | Cars & Trucks
Nov 02, 2015 | 2005 Buick Rendezvous
Apr 07, 2015 | Cars & Trucks
Sep 25, 2014 | 2002 Subaru Forester
Dec 07, 2013 | Cars & Trucks
Feb 25, 2013 | 2002 Toyota ECHO
Oct 12, 2012 | 2001 Mercedes-Benz ML 320
P0447....Evaporative Emission Control System Vent Control Circuit Open
its a fault for the vapour control circuit and according to teh read out it would appear that the motor isnt connected but its not a serious fault and you can drive the vehicle with no problem
Mar 07, 2011 | 2004 Buick LeSabre
Mar 03, 2011 | 2002 Chevrolet Tracker
Jan 07, 2010 | 2002 Nissan Frontier Crew Cab
Sep 12, 2019 | Land Rover Cars & Trucks
Jun 30, 2019 | Land Rover Cars & Trucks
820 people viewed this question
Usually answered in minutes!