SOURCE: distributor cap firing order
Your firing order is 1-3-4-2 The rotor in the dist cap rotates clockwise, cylinders are numbered 4 at front of engine, 3,2,1 at firewall.
SOURCE: cannot start changing pugs and wires
Sounds like you have the firing order right but your off on the #1 on the distributer. Every time you get an explosion coming from the carb its misfiring. Find the #1 on dist and continue with firing order
SOURCE: I have a 1968 buick 225 motor in my boat.
That's how it gets wired. Just make sure that you have the correct position for the #1 cap post.
SOURCE: I changed my dist. cap on 1990 chevy p/u took one
Is the coil connected to the ditributor? did you knock any connections off in the process? Does it turn over but not fire? do you have spark at the plugs? Are you sure of cylinder location in respect to firing order? Did you-and check this first as with any elec. problems-blow a fuse in the ignition circuit? good luck!
808 views
Usually answered in minutes!
×