SOURCE: Timing belt light of Toyota LandCruiser 2006
the reset procedure of the timing belt light is all done by pressing the trip meter button and holding it in whilst the ignition is turned to on then select from the trip button then continue pressing until you come to 15 on trip metre, turn off and then restart. The light should then go off.
SOURCE: 2003 model Toyota Prado Landcruiser air conditioning light flashing
i think it is a wiring problem mine does the same i keep pressing the bottom on and off then after a while it came on and stayed on then a few months later i pluged a satnav in the power point then it messed up the air conditioning again i have had a lot of wiring problems with mine
1,655 views
Usually answered in minutes!
Make sure the trip/odometer is set to "ODO". Switch ign off. While perssing the ODO button, turn the ign on and hold the button for 8 seconds, release the button and press it again within 5 seconds. Now in the TBelt mode each time you press the trip button you will increase the Km's by 10,000. Once you get "15" displayed (150,000km), press and hold the trip button for more than 5 seconds. All should be good.
Work's perfectly on 2003 land cruiser , thanks a lot!
×