1996 grand am se 2.4 liter. Have power to dash everything, no power to the fuel/ignition system

3.1L (VIN M) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

Turn on headlamps and try to start. Do lights dim? Yes= bad battery connections, low charge on battery, bad solenoid, bad starter. Not dimming? bad solenoid, bad starter switch, bad neutral safety switch, bad starter relay, bad ignition switch. Use voltmeter to see if ignition switch works, and so on.

On 1996 Pontiac Grand AM 3.1 liter V-6 VIN "M"... Firing Order 1-2-3-4-5-6.

If you need this diagram or other information, countact us in the previous link.

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa.

Go to this site for what you need;

http://www.jeepz.com/forum/engine/16923-six-cylinder-4-0-liter-jeep-engine-specs.html

If by chance your check engine light does not light up on your dash, when you turn your ignition on, then your ecu is in need of repair.

first check your fuel injectors to see if you"re getting a steady flow of gasoline ,if not your fuel pump is going bad

your car would struggle at high speeds if it was the fuel pump.

Go to a mechanic, I can't stress this enough, and get a full systems check. Basically the mechanic pulls out this mini computer lookin device and hooks it up to your engine and tells you everything that is wrong. It's 50-80 bucks. Well worth it.

Try engine cleaner (put into a full tank of gas) or a tune up would do nothing but help.

Ignition switch?

multifunction switch

sounds like a faulty motor or relay

check fuses and relays