- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
toyota corolla has two fuse boxes which contains the diagram on its cover.
1. inside the engine compartment near the left fender
2. undernneath the instrument panel near the left hand side of steering wheel.
well the 4 spark plug is located in front on the cylinder head,you have to take out the wire of the spark plug the you can see it,note; when you take out the cap from the spark plugs put a marking on the cap to make sure you dont put the wire for the 1st cylinder to the 3rd cylinder .....
remove the spark plug wires and use a blow gun to dry the spark plug tubes of any water that may have gotten in, the blinking engine light means there is a missfire. and check those fuses with the headlights on and see if they have power.
The spark plugs are actually along the top side of the engine. They do not have external wires like some vehicles. First remove the dust cover. Next, there are 4 hex screws along the top of the head that reatin the spark plug casings. Remove these screws and twist out the spark plug connectors and change the plugs as normal. You will need a small flat head screw driver to undo the retaining clip for the electical connections. Be sure to use pre-spaced iridium plugs. you will need to remove the few bolts that hold down the cover for the wires to get to cylinders 3 and 4. 1 and 2 are okay to do without removing this, but remember to change the whole set of plugs. It is an east task.