Question about 1994 Mitsubishi 3000GT

1 Answer

Stereo code for 1994 3000gt

Battery was changed in car now the stereo won't work without a code. i had the code and it was in a vehicle that i had stolen a month or so ago. I need help.

Posted by sharm_2u on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You will need is the information from the label that is located on the top of the radio. To remove the radio is really quite easy.

1. Gently pry the trim plate from around the radio. This can be accomplished by taking a flat blade screwdriver and carefully prying up and out at one of the bottom corners. Once you see it pop out, repeat this on the other bottom corner. The bottom will be out and you can then pull the top away from the dash to remove it. There are two small plastic tabs on the bottom of the bezel, and two metal clips on the top that secure the trim to the dash. Very easy to do.

2. Once the trim is off you will see 4 phillips head screws that attach the radio to the dash. Remove them one at a time (be careful not to drop them into the dash like I do every time I do this LOL). Once the 4 screws are removed simply pull the radio towards you out of the dash. You do not have to remove it completely to see the tag, it is located on the top of the radio on the drivers side.

3. Write down the numbers on the tag. One is the model number that is in bolder lettering that starts with either an MR or MB. The other is the serial number.

4. Call practically any Mitsubishi dealership and ask for the service department. Tell them you are looking for a code for your radio. They will more than likely just need the serial number and within seconds will give you the code for it. This way you also don't have to take it in and have them charge you for "fixing the radio".

Once you have the code, reinstall the radio, turn the key on, turn the power on to the radio and enter the code pushing the #1 station button until you get the first digit, then the #2 station button until you get the 2nd, the #3 station button until you get the 3rd, then the #4 button until you get the 4th.


The next step depends on your radio. Once you have the code showing on the radio you will either have to push the "program" button to enter it, or the "Cassette" button to enter it.

You will have 3 chances to do it right, and if you fail and the radio says "lock" on the display do not panic. All you will need to do is leave the key on for one hour or so, and the "lock" will dissapear, and "code" will return.

Posted on Nov 13, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2003 expedition.about a month ago it quit goin down the road and we put a fuel pump and a cam sensor in it and it ran .yesterday it quit again I put another new pump and can sensor but it won’t...


Ford's PATS anti-theft system disables the starter from spinning the engine . Flashing real fast while trying to start the vehicle means the vehicle see's wrong key code ,think's the vehicle is being stolen . Code's stored in the computer , FORD dealer , nothing you can or should do .

Jun 03, 2018 | Cars & Trucks

1 Answer

How can I eject stuck CDs from CD player 2006 toyota camry grande?


Isn't there a security code needed to reset the stereo after a battery change? The Stereo thinks it has been stolen. See your Manual and see your nearest Toyota dealer. Or use a tweezers to reach in and pull out the stuck CD. And clean the rollers with alcohol.

Dec 29, 2014 | 2006 Toyota Camry

1 Answer

Whats my stereo code


Ask for this at the vehicle manufacturer or the vehicle sales agency (if stereo was originally fitted in this vehicle, as new) or contact the stereo manufacturer. One would normally have to take the vehicle to the manufacturer or agency for this info and resetting, as this specific coding is of course a precautionary measure against "stolen" equipment being sold for gain by thieves!

Jul 25, 2014 | 2000 Renault 181

1 Answer

The battery was disconnected and now that it is connected the stereo won't work unless i put a code in and i don't know the code because i don't have a manual. i think the manual might be in...


you need to contact the manufacturer of the vehicle and tell them the vin number and they can give you the code ( you could pay a fee for this info ) this solution only works if the stereo is an original fitment to this vehicle.

Aug 14, 2011 | Ford Festiva Cars & Trucks

1 Answer

After changing the battery in my 1997 Buick Riv, the radio is stuck in LOC mode. How to munlock??


You should have used a battery saver plugged into the cig lighter before changing it out. The Dealer will have to unlock it now. They have the code it takes to do it. Lots of times car company's did this to prevent stolen stereos from working again once power was cut off. Theifs could'nt get rid of them cause they did'nt work without the code to unlock it.

Dec 24, 2010 | 1998 Buick Riviera

1 Answer

Just bought my honda civic and need to know the code to setting the stereo can not turn radio on without code no indtruction manual


Just take the car to you local Honda dealership and they will provide you with the code. And its free. You have to go in the dealership with the car. if you call them they won't do it. They need to know that you are the actual owner of the vehicle and not someone that has stolen the radio and is now trying to get it to work in a different car.

Nov 10, 2010 | 2002 Honda Civic

1 Answer

Battery changed in 1995 Honda Accord, now stereo won't work without a code, which I don't have. Need help.


I Battery changed in 1995 Honda Accord, now stereo won't work without a code, which I don't have.

Apr 12, 2010 | 1995 Honda Accord

1 Answer

2006 pontiac torrent


get a n accredited battery shop out to load test and replace the battery
they use a memory minder to keep all security codes in tact while the battery is being replaced
then have the alternator/ charge circuit tested at an accredited auto electrician

Apr 27, 2017 | 2007 Pontiac Torrent AWD

1 Answer

Radio code for honda prelude


The code should be on top of your radio, the only thing you got to do is remove the plastic that goes around the AC controls and stereo. You can either unscrew the radio it self or the AC controls. I have done this a few times just because I misplace the code and of course I have to remove the battery cable to perform certain jobs.

Sep 06, 2008 | 2000 Honda Prelude

Not finding what you are looking for?
1994 Mitsubishi 3000GT Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...