I just baught this blazer it was an old military blazer and im wanting to hook up a radio in this blazer. it had one in it but it was really old and they just plugged it into the fuse box(does not work). no wires connected to the fuse box and no hook up on fuse box for radio. not shure if the originall blazer came with a stereo or not. what do i need to do so i can hook a newer stereo in this blazer with an amp and one 12in speaker. will i need to go to a junk yard and get one from a blazer that was not military issued to install or is there a way i can do it myself??????
SOURCE: i need diagram that shows what the fuse names are where they go
Attached is the best view I could find. Hope it helps.
Let me know.
Regards,
SOURCE: M y radio stopped working on my 2004 trail blazer
The 2004 Trailblazer has two fuse panels, one in the under hood and one under the middle row seats. The radio fuse is marked RADIO fuse # 41 and is a 15 amp fuse located in the rear fuse panel. To access the rear fuse panel flip the seat behind the driver to the upright position, under it you can see the fuse panel and a diagram should be on the under side of the cover.
Good luck and hope this helps.
SOURCE: Removed & replaced dist. cap and rotor on 1993 S10 Blazer 4.3 V-6
The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise. 4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.
SOURCE: turn signals wont work
The element are serpent in the lights bulb the turn signal and brake usually share the same one but the running or park light are not shared with the turn . so if none of the light for the turn signal light then you will want to look for your flasher control it is ether in or near the fuse box or under dash by steering wheel shaft,,you should also check grounds at light socket if we can be of any further assistance please feel free to ask hope this gives you a place to start .Thank You..
58 views
Usually answered in minutes!
×