Question about Saturn SC2
Saturns are known for bad "trans" you may want to change the fluid and add a quart of trans restore in it.
if it is a manual trans the synchros may be bad.
Posted on Aug 16, 2008
Tips for a great answer:
Oct 27, 2015 | 1996 Volkswagen Jetta
The reversing lamp system consists of the following components:
When the transmission is placed in REVERSE (R), the BCM provides voltage to the reversing lamps. The reversing lamps are located within the rear lamp assemblies.
When the transmission is in REVERSE, the PCM (gasoline engine) or the Transmission Control Module (TCM) (diesel engine) sends a message over the High Speed Controller Area Network (HS-CAN) to the Body Control Module (BCM) indicating the transmission is in REVERSE. The BCM provides voltage to the reversing lamps when it receives the message that the transmission is in REVERSE and the ignition is in the RUN state. You could have a transmission range sensor problem , check to see if it is adjusted correctly ! Need to have a scan tool to make sure the BCM is receiving signal from the PCM . This is complex for someone who doesn't deal with or know about serial data communications ! All it is ,is electric inputs to a control module, then the control module configures it into data bits an bytes 1's an 0's then sends it out on the Data bus. The module that needs this info reads it an turns on the lights.This system can set codes in the bcm ,leading to a problem.
Jan 28, 2015 | Ford F-350 Cars & Trucks
Oct 25, 2014 | Cars & Trucks
Jul 26, 2017 | 2004 Ford F150
Aug 08, 2009 | 1994 Chrysler New Yorker
Feb 21, 2009 | 1999 GMC Jimmy
Jan 28, 2009 | 1999 Mercedes-Benz E-Class
59 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: