Question about GMC Sierra

Open Question

Passenger Curb Assist

I have a 2003 GMC Sierra SLE 4x4 with curb assist. Both mirrors turned down when I put the truck in reverse, but the other day the passenger mirror stopped turning down as much as it did. It turns down very slightly, but not as far as it once did. Did I change a setting, or is something wrong? The power mirror adjustment works in a full range of motion.

Posted by dubs_17 on

Ad

5 Related Answers

garyq1970

Gary Queen

  • 85 Answers

SOURCE: How to replace side mirror on 1996 GMC Sierra?

See Figure 2
0900c1528008f812.jpgFig. 2: Outside mirror-below eyeline type

  1. Remove the mirror cover screw and lift the cover and pivot the mirror towards the window.
  2. Remove the mirror to door bolts and remove the mirror and seal from the door.
  3. To install, position the mirror and seal to the door and install the retaining bolts.
  4. Pivot the mirror away from the window, and lower the mirror cover.
  5. Installation is the reverse of removal.
  Hope this helps .. if not feel free to contact me

Posted on Nov 12, 2008

Ad

Anonymous

  • 2 Answers

SOURCE: 2003 Sierra rearview mirror

replace outside sensor

Posted on Feb 28, 2009

Ad

Anonymous

  • 209 Answers

SOURCE: Loose side mirror. Need to tighten it up.

just remove the panel inside at the side of the mirror, then you will find the bolts.

Posted on Apr 25, 2009

cshubart

Corey Shubart

  • 146 Answers

SOURCE: My Power window on my 2003 GMC Sierra 1500 Truck

if your main switch panel still works the passenger window and if door locks still work probaly bad window motor

Posted on Oct 21, 2009

kdgrayson

Keith Grayson

  • 195 Answers

SOURCE: 2000 GMC Sierra Power mirrors do not work

sounds like a switch as common error oboth sides unlikely

Posted on Dec 31, 2009

Testimonial: "Thanks, I'll give it a try"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Curb assist option


Mirror Tilt in Reverse Controls
This feature is capable of tilting the passenger side power mirror when the transmission is placed in reverse to provide enhanced visibility during parking or backing maneuvers. This feature is turned OFF or ON through the DIC. The passenger mirror on domestic vehicles can not be changed from the factory setting, but on export vehicles, the passenger mirror position may by changed using the same procedure as the driver mirror. For further information, refer to Driver Personalization in Personalization.

Tilt Mirror In Reverse
Continue with the following steps in order to personalize the tilt mirror in reverse.
Press the Select button in order to enter the menu. The first choice seen is the current setting.
Press the Select button in order to scroll through the following options:
• CURB VIEW: OFF (Default)
• CURB VIEW: PASSENGER
Press the Personalization button in order to advance to the next option.

Feb 25, 2018 | 2006 GMC Envoy

Tip

Reversing passenger mirror shows curb


Put the control (on the driver door for your side view mirrors) onto the passenger mirror position put the car in reverse, mirror tilts down and shows you the curb! (this only works on some models like the 3.0 not sure of what year of 1.8t)

on May 19, 2008 | 2006 Audi A4

1 Answer

How to deactivate parking assist option


Hello, Janice -

I can only think you do not have the owner's manual for your vehicle. The information about turning the curb view assist mirror on and off can be found in the manual.

This is the link to the PDF format user's manual for the 2006 GMC Envoy:
https://my.gmc.com/content/dam/gmownercenter/gmna/dynamic/manuals/2006/gmc/envoy/2006_gmc_envoy_owners.pdf

You will need Adobe Acrobat Reader software (free) to download/save the manual. If you download and save the manual to your Documents folder, be sure to save it using a file name you can find again easily, something like: GMC Envoy 2006 Manual.

The instructions to turn the Curb View off is on page 3-64 (Image 208) of the manual.

Best wishes.

Feb 25, 2018 | 2006 GMC Envoy

1 Answer

I drove 1994 BMW 740IL and the passenger side mirror usually will move down when i put my car on reverse so i can see the curb view, however it stop working just now when i get in my car to back out from a...


Make sure your mirror control switch is slid to the right. If the switch is in the left mirror position, it keeps the right mirror in the upward position when in reverse. When the switch is in right mirror position, it moves the right mirror in the downward position when in reverse. Hope this helps.

Oct 23, 2010 | 1994 BMW 7 Series

1 Answer

Passenger side mirror must constantly be adjusted.Is fine with truck running,after shutoff,the mirror points down and must be re-adjusted


There is a feature on the topend models called something like "Park Assist". It is suppose to tilt the mirror down when you put the vehicle into reverse so the outside mirror will show the curb. This is suppose to help in parallel parking.

The control for this feature is on the Electronic menu. This menu also has the Auto doorlocks, Alarm Chirp, and a few other gadgets. Since the Mirror control is obviously out of control you may try to turn this feature OFF. The Owners manual should show you how. I know that one of the buttons advances the Menu and another changes the setting.

If the Mirror changes settings with the door slamming, then its a problem with the cable running through the doorjam.

May 29, 2010 | 2004 Ford Expedition

1 Answer

2002 envoy side mirrors continually change settings, how can I fix this so I don't need to adjust them every time I unlock my truck?


Go in through the DIC using the buttons on the steering wheel to where it says curb view assist...and turn off.

Jul 24, 2009 | 2002 GMC Envoy

2 Answers

I need to know how to remove the CD player on my 2000 GMC Sierra SLE 4x4


your front trim plate that goes around dash from drivers sidde to radio just snaps off use a flathead screw driver to pry. put shifter all the way down in 1 to gain clearance. 7 mm screws hold the radio in place remove disconnect wires and go

Jul 03, 2009 | 2000 GMC Sierra

1 Answer

2003 cadillac seville


That function is normal to show you the curb, but it should go back to where it was. You might push on the glass to adjust it as i might have been moved when it was washed or elbowed in a parking lot.

Apr 20, 2009 | 1998 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...