Question about Isuzu Pickup

Open Question

Timing marks for 2001 Isuzu (Compensator) KB250LE Diesel

Can you show where the timing marks is?

Posted by rhona157 on

Ad

5 Related Answers

Anonymous

  • 3 Answers

SOURCE: 1994 isuzu holden rodeo injection timing adjustment

try u-pull our patrs

Posted on Sep 12, 2008


alicantecoli

Colin Stickland

  • 22485 Answers

SOURCE: need the timing marks for a 3.1 td 5 cyl diesel injection pump

isusu engine?? have you looked for a 8mm hole in timing gear that corresponds with a hole on plate behind then lock it in with a bolt ,remove bolt after tightening belt .DONT FORGET THIS ???.....if you cant find anything do it with no timing marks easy --- piston no 1 at tdc valves closed spin pump till fuel comes out of no 1 injector feed and lock it all together,indirect diesel is 6/8 ,,,,,direct injection is 12/16,,,,and turbo is 18/22 btdc

Posted on Dec 13, 2008

Ad

Anonymous

  • 98 Answers

SOURCE: Just need to know about timing marks, please

when you pop the hood look around you should see a sticker that will tell you

Posted on May 19, 2009

simontricket

Simon

  • 235 Answers

SOURCE: Isuzu bighorn diesel 4jg2 engine timing diagram

http://www.jeepolog.com/UserFiles/downloads/trooper_manual.pdf

This site has it .

Posted on Aug 25, 2009

TDISLine

TDISLine

  • 1874 Answers

SOURCE: 1999 Ford Transit Turbo Diesel

The timing marks diagram for 1999 Ford Transit Turbo Diesel 2.5 TD, 85 kW, (116 BHP) "4ED" engine code:

tdisline_143.jpg

Posted on Jan 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are Cam and crankshaft timing marks on nadia d4d engine


follow this link for a video showing change of timing belt , this will show the timing marks etc
Toyota avensis D4D 2 litre diesel timing belt installation

May 04, 2015 | Cars & Trucks

1 Answer

Timing belt


first ever post, with displacement . 93 Rodeo,
so can be looked up .

the belt (gates) comes with instructions, did you buy a cheap
china belt off fleabay? with none?

alldata.com shows
its a DOHC engine.
28 steps

first the warning. at step 13
Set the timing sprockets so that the crankshaft and camshaft sprocket timing marks align with the timing marks on the oil pump and front plate. When the timing marks are align, no pistons are at TDC for the compression stroke. Valve damage may result if the sprockets and belt are out of alignment.

there is a tensioner that as a locking pin,.do you know how to do that?

ill not answer how do it all, only the timing question.
here is the answer.
Ill answer not for removal but install.

install : step 1 and 2
  1. Align the groove on the crankshaft timing pulley with mark on the oil pump.
  2. Align the marks on the camshaft timing pulleys with the dots on the front plate.

photo 1 shows crank marked at 3pm cog wheel. and pump base.
photo 2 shows.



d8287f6b-372d-4688-85e1-6c00635efd23.jpg

there is more , but do log in at alldata.com and read all steps.
and win.

Jun 17, 2014 | 1993 Isuzu Rodeo

1 Answer

Timing marks 1997 Taurus SHO V8


Register for free at autozone.com. You can show make, model, year, and engine size-for as many vehicles as you want to list. Vehicle specific repairs and information like timing marks set up are found under the repair guides.

Apr 02, 2014 | Ford Taurus Cars & Trucks

1 Answer

2001grand am car set the timing chain marks show how


Hope this helps This picture maybe alittle big but its a good diagram
5_12_2012_1_49_01_pm.gif

May 12, 2012 | Cars & Trucks

1 Answer

Trying to find timing marks for 1995 Toyota Corolla 7a-fe


the timing marks are on the timing cover just above the crankshaft pulley(harmonic balancer)and can be seen with a light either forward or rearward of the top of the pulley.the mark on the pulley is usually just a slot(groove) cut into the pulley that you line up with the marks on the timing cover showing the degrees of timing,note there is before top dead center and after top dead center timing marks shown and the marks that you use is before top dead center.

Apr 06, 2011 | 1996 Toyota Corolla

1 Answer

Timing belt marks


The crank pulley should have a mark that is approx 12 o clock with an arrow on the block. Both cams should have marks,'I' for the rear cam and E for the front, and the dowel pins (in the end of each cam)AND the marks on the cam pullies will be 12 o clock with the back cover. Be SURE you TORQUE the crankshaft bolt to 120 ft lbs.

Dec 16, 2009 | 1992 Mazda Protege

1 Answer

I need the timing marks to set the crankshaft to top dead center for a timing belt replacement. I just need a diagram to show me where the timing marks are located, where should the camshaft pulley mark be...


1986 Dodge Truck RAM 50 4WD 2.6L 2BL 4cyl

Fig. Timing belt and components-2.0L engine
9f07c9a.jpg


Fig. Location and correct alignment of timing marks for the timing belt (camshaft)
6f4c9d6.jpg


Fig. Timing marks-2.3L diesel engine
40625e5.jpg


Fig. Timing marks-2.4L engine
124bdbc.jpg


More details, autozone.com (free register). Good luck.

Sep 29, 2009 | 1986 Dodge Ram 50

1 Answer

Need to time it not sure were timing marks are can anyone help


1990 FORD ESCORT 1.9L TBI SOHC 4CYL REPAIR GUIDE

Confirm that the timing mark on the crankshaft pulley aligns with the TDC mark on the front cover (arrows)

5fac911.gif


A sticker located on the timing cover identifies the timing marks and also shows the 0 degree mark on the crankshaft pulley

6136f60.gif


Good luck (remember rated this help).

Sep 18, 2009 | 1990 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14832 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...