What side are the odd number spark plug located. are plugs 1, 3 and 5 located in the front at the bumper or are they located under the windshield. anyone kn ow where I can get the firing order and spark plug location at.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
STANDING IN FRONT OF CAR TO THE LEFT ON PASSENGER SIDE CYLINDERS FACING YOU ARE 1 2 3 ON DRIVER SIDE CYLINDERS FACING YOU ARE 4 5 6 ALL THIS INFORMATION I GAVE YOU IS FOR THE 3.0L AND 3.2L DISTRIBUTORLESS ENGINE.WRITE BOTH NUMBERS I GIVE YOU 3 2 1 AND WRITE NUMBER 4 6 5 PUT NUMBER 321 ON TOP OF 465 THAT WILL BE SPARK PLUG WIRES LOCATION ON COILS.THEN ROUTE THEM TO THE CYLINDERS SPARK PLUGS.BESURE TO HOLD PAPER WITH NUMBERS I GAVE YOU NUMBERS STAND IN FRONT OF ENGINE SO YOU WONT MISLOCATE SPARK PLUG WIRES FROM COILS TO SPARK PLUGS.
FORD SABLE HAD TWO 3.0 ENGINES. ENGINE WITH CRANKSHAFT PULLEY FACING FRONT TOWARD RADIATOR AND GRILLE. CYLINDERS ON LEFT PASSENGER SIDE IS 1 2 3 CYLINDERS ON DRIVER SIDE THE RIGHT IS 4 5 6 GET PIECE OF PAPER WRITE NUMBER 321 AND WRITE UNDER THAT NUMBER THE NUMBER 456 STACK THEM NUMBERS ON TOP OF EACH OTHER THATS WHERE PLUGS WIRES LOCATION IS THE ROUTE THEM TO CYLINDER SPARK PLUGS NOW IF YOU HAVE THE 3.0 ENGINE TURNED SIDE WAYS.CYLINDERS FACING YOU 4 5 6 AND BACK CYLINDERS ARE 1 2 3 GET A PIECE OF PAPER WRITE NUMBER 456 THEN WRITE THIS NUMBER UNDER THAT NUMBER 321 WITH NUMBERS ON TOP OF EACH OTHER.LINED UP.THAT WILL BE YOUR SPARK PLUGS WIRES LOCATION.THEN ROUTE THEM TO THE CYLINDERS LIKE 1 TO 1 CYLINDER.
STANDING IN FRONT OF ENGINE FACING CRANKSHAFT.CYLINDERS ON LEFT SIDE ENGINE 1 3 5 AND CYLINDERS ON THE RIGHT SIDE OF THE ENGINE ON DRIVER SIDE IS 2 4 6 GET PIECE PAPER WRITE NUMBER 5 3 1 AND UNDER THAT NUMBER WRITE NUMBER 2 6 4 THATS COIL PLUGS WIRES LOCATION HOLDING THAT PIECE OF PAPER FACING FRONT OF ENGINE IS PLUG WIRES LOCATION ON IGNITION COILS TO ENGINE SPARK PLUGS. NUMBERS ON PAPER HAS TO LINE UP LIKE 5 OVER 2 AND 3 OVER 6 AND 1 OVER 4 NUMBERS I GIVE YOU WHEN YOU LINE THEM UP HOLD PAPER STANDING FRONT ENGINE.THAT IS CORRECT PLUG WIRES LOCATION ON SPARK PLUG COILS.
Insofar as your Ignition Wiring Diagram, I hope you're speaking of what's also called the Spark Plug Cables or Firing Order. The proper Firing order for your V-6 is 1-5-3-6-2-4 with the number 1 cylinder being the front spark plug on the left hand side. The left hand side is Odd numbered and the Right hand side is Even numbered, therefore number 2 cylinder is the 1st plug on the right hand side of the engine.
Hi: To Install the Distributor Correctly, 1st thing to do is Remove your #1 Spark Plug assuming it will turn over have someone Turn the Key Off and On in Short Intervals.Either put a Compression Gauge in the #1 Spark Plug HoleOr the Old Fashion Way Works as well just put your Finger in the #1 Plug Hole.As your Helper Cranks the Engine On -Off On -Off.Not A Continuous Crank.When You Feel Air Pressure or See gauge Come up.TYhats when your Engine is a The compression Stroke.Now you Can Drop the New Distributor in its Hole.NOTE: You'll need a Spark Plug and Timing Diagram to See the Position your Distributor ROTOR Line it up to where the Diagram Shows your #1 Spark Plug Wire Will go in the Distributor Cap.If the Distributor Rotor is Not n That Position Your goning to Get Either Back Firing engine May Not Even Stsrt, To This Is Crucial. After The Know that you have The Distributor Droppped The Right position you'll need to Put Gap your Plugs at the Correct Specs, With All Plugs in Now You'll need to Put New Plug Wires on .And They MUST be in the correct order.Sitting inside your Vehicle #1 Plug is the Front Plug on the Drivers Side Next is #3 plug Next is #5 and Your Back Plug is Number 7,On the other side Passenger Front Plug is #2 next #4 Next is #6 and the Back is #8 Assuming you know have your Distributor Dropped in The Proper Position, Put the #1 Spark Plug Wire on the Front Spark Plug (Drivers Side) The Spark Plug Firing Order in Your Engine is 1-8-4-3-6-5-7-2 Clockwise So the Next hole after you have #1 Plug and Wire on And Distributor In Correct Position on COMPRESSION STOKE, Going Clockwise you next wire will be your #8 Position in The Cap And it wil go to the Back Spark Plug on The Rear Spark Plug on Passenger Side. NOTE: Drivers Side Spark Plugs on the Drivers Side Front to Back are Your Odd Numbers 1-3-5-7 Pasenger Side is Your Even Numbers From The Front is #2-4-6-8 Is The Rear PLug .
Heres a Diagram of your Spark plug Positions
Front of Engine
Hope This Will Get You Going. Let me know The Quality of Help and Solution I've Given You By Voting on It.And May Can Also Send a Testamony
I don't have a link with pictures, but I will describe the cylinder and coil numbers for both the overhead valve (OHV) and the overhead cam (OHC) as best I can.
Facing the engine from the front bumper.
On the 3.0 overhead valve (OHV) the cylinder location looks like this:
1 2 3
4 5 6
The coil location looks like this:
If you have the 3.0 overhead camshaft (OHC) engine again facing the engine from the front bumper your cylinder location looks like this:
ford starts with #1 is pass front #2 is 2nd pass from front #3 is 3rd pass front # 4 is forth from pass front now i dont know if it is a v8 or v10 if it is a V8 THEN # 5 IS THE FRONT DRIVERS SIDE IF IT IS A V10 THEN #5 IS THE REAR PASSENGER SIDE